DN 65 EN 10253 / DIN 2615 Tee Dimensions
DN 65 (2 1/2") to EN 10253-2: Pipe OD 76.1 mm; Centre to end 76 mm.
Key to dimensions
- D
- Pipe outside diameter
- F
- Centre to end of run and branch
DN 65 EN 10253 / DIN 2615 Tee Dimensions — all dimensions
EN 10253-2 equal tees (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| Pipe OD — D | 76.1 mm | 3.00 in |
| Centre to end — F | 76 mm | 2.99 in |
Values are nominal, from EN 10253 / DIN 2615 Tee Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — EN 10253 / DIN 2615 Tee Dimensions
Related for this size
2½" ASME B16.9 Butt Weld Elbow Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.92½" ASME B16.9 Butt Weld Tee Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.92½" ASME B16.9 Butt Weld Reducer Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.92½" ASME B16.9 Butt Weld Pipe Cap Dimensions
Same size — open the dimensions page.
View online · PDFASME B36.10M2½" Pipe Schedule Chart — ASME B36.10M
Same size — open the dimensions page.
View online · PDFFAQ
DN 65 EN 10253 / DIN 2615 Tee Dimensions: common questions
What are the DN 65 EN 10253 / DIN 2615 Tee Dimensions?
DN 65 (2 1/2") to EN 10253-2: Pipe OD 76.1 mm; Centre to end 76 mm.
Does Teshi Group manufacture DN 65 butt weld fittings?
Yes. Teshi Group is an OEM manufacturer in India of butt weld fittings to EN 10253-2, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the DN 65 dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full EN 10253 / DIN 2615 Tee Dimensions chart.
Need DN 65 butt weld fittings?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.