5 inch BS 10 Table T Flange Dimensions
5 inch (DN 125) to BS 10: OD 324 mm; thickness 66.7 mm; PCD 273 mm; bolts 12; holes 31.8 mm.
Key to dimensions
- D
- Outside diameter of flange
- C
- Flange thickness, excluding raised face unless stated
- K
- Bolt circle (pitch circle) diameter
- n
- Number of bolts
- L
- Bolt hole diameter
- Bolt
- Bolt size (metric M or inch diameter)
5 inch BS 10 Table T Flange Dimensions — all dimensions
BS 10 Table T — flange dimensions
| Dimension | Value | Equivalent |
|---|---|---|
| Size | 125 | |
| Flange OD — D | 324 mm | 12.76 in |
| Flange — C | 66.7 mm | 2.63 in |
| Bolt circle — K | 273 mm | 10.75 in |
| Number of bolts | 12 | |
| Hole dia — L | 31.8 mm | 1.25 in |
| Bolt size | 1 1/8 |
Values are nominal, from BS 10 Table T Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — BS 10 Table T Flange Dimensions
Same size in other ratings
Related for this size
5" Stud Bolt Chart for ASME B16.5 Flanges
Same size — open the dimensions page.
View online · PDFASME B16.205" ASME B16.20 Spiral Wound Gasket Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.215" ASME B16.21 Non-Metallic Flat Gasket Dimensions
Same size — open the dimensions page.
View online · PDFASME B36.10M5" Pipe Schedule Chart — ASME B36.10M
Same size — open the dimensions page.
View online · PDFFAQ
5 inch BS 10 Table T Flange Dimensions: common questions
What are the 5 inch BS 10 Table T Flange Dimensions?
5 inch (DN 125) to BS 10: OD 324 mm; thickness 66.7 mm; PCD 273 mm; bolts 12; holes 31.8 mm.
Does Teshi Group manufacture 5 inch flanges?
Yes. Teshi Group is an OEM manufacturer in India of flanges to BS 10, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the 5 inch dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full BS 10 Table T Flange Dimensions chart.
Need 5 inch flanges?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.