ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
BS 10FlangesTG-DS-050 · size page

8 inch BS 10 Table K Flange Dimensions

8 inch (DN 200) to BS 10: OD 368 mm; thickness 48 mm; PCD 12 1/2 in; bolts 12; holes 29 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø368K (PCD) = Ø31812 holes × Ø29C = 488 inch BS 10 Table K Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
C
Flange thickness, excluding raised face unless stated
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

8 inch BS 10 Table K Flange Dimensions — all dimensions

BS 10 Table K — flange dimensions

DimensionValueEquivalent
Size200
Flange OD — D368 mm14.49 in
Flange — C48 mm1.89 in
Bolt circle — K12 1/2 in317.5 mm
Bolt circle — K318 mm12.52 in
Number of bolts12
Hole dia — L29 mm1.14 in
Bolt size1

Values are nominal, from BS 10 Table K Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

8 inch BS 10 Table K Flange Dimensions: common questions

What are the 8 inch BS 10 Table K Flange Dimensions?

8 inch (DN 200) to BS 10: OD 368 mm; thickness 48 mm; PCD 12 1/2 in; bolts 12; holes 29 mm.

Does Teshi Group manufacture 8 inch flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to BS 10, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 8 inch dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full BS 10 Table K Flange Dimensions chart.

Need 8 inch flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote