24 inch BS 10 Table H Flange Dimensions
24 inch (DN 600) to BS 10: OD 33 1/2 in; thickness 2 1/4 in; PCD 30 3/4 in; bolts 24; holes 1 3/8 in.
Key to dimensions
- D
- Outside diameter of flange
- C
- Flange thickness, excluding raised face unless stated
- K
- Bolt circle (pitch circle) diameter
- n
- Number of bolts
- L
- Bolt hole diameter
- Bolt
- Bolt size (metric M or inch diameter)
24 inch BS 10 Table H Flange Dimensions — all dimensions
BS 10 Table H — flange dimensions
| Dimension | Value | Equivalent |
|---|---|---|
| Size | 600 | |
| Flange OD — D | 33 1/2 in | 850.9 mm |
| Flange OD — D | 851 mm | 33.50 in |
| Steel, heavy series — C | 2 1/4 in | 57.1 mm |
| Steel, heavy series — C | 57 mm | 2.24 in |
| Steel, light series — C | 3 in | 76.2 mm |
| Cast iron — C | 2 1/2 in | 63.5 mm |
| Bolt circle — K | 30 3/4 in | 781.0 mm |
| Bolt circle — K | 781 mm | 30.75 in |
| Number of bolts | 24 | |
| Hole dia — L | 1 3/8 in | 34.9 mm |
| Hole dia — L | 35 mm | 1.38 in |
| Bolt size | 1 1/4 |
Values are nominal, from BS 10 Table H Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — BS 10 Table H Flange Dimensions
Same size in other ratings
Related for this size
24" Stud Bolt Chart for ASME B16.5 Flanges
Same size — open the dimensions page.
View online · PDFASME B16.2024" ASME B16.20 Spiral Wound Gasket Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.2124" ASME B16.21 Non-Metallic Flat Gasket Dimensions
Same size — open the dimensions page.
View online · PDFASME B36.10M24" Pipe Schedule Chart — ASME B36.10M
Same size — open the dimensions page.
View online · PDFFAQ
24 inch BS 10 Table H Flange Dimensions: common questions
What are the 24 inch BS 10 Table H Flange Dimensions?
24 inch (DN 600) to BS 10: OD 33 1/2 in; thickness 2 1/4 in; PCD 30 3/4 in; bolts 24; holes 1 3/8 in.
Does Teshi Group manufacture 24 inch flanges?
Yes. Teshi Group is an OEM manufacturer in India of flanges to BS 10, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the 24 inch dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full BS 10 Table H Flange Dimensions chart.
Need 24 inch flanges?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.