ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
ASME B16.9Butt weld fittingsTG-DS-016 · size page

1/2 inch ASME B16.9 Lap Joint Stub End Dimensions

1/2 inch (DN 15) to ASME B16.9: Barrel 21.3 mm; Long pattern 76 mm; Short pattern 51 mm; Lap dia 35 mm; Fillet radius 3 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
Lap joint stub end dimension drawing showing length F, lap diameter G and fillet radius RFGRLap joint stub end (not to scale)

Key to dimensions

OD
Outside diameter of barrel
F
Length — long pattern and short pattern
G
Diameter of lap
R
Radius of fillet

1/2 inch ASME B16.9 Lap Joint Stub End Dimensions — all dimensions

Lap joint stub ends (mm)

DimensionValueEquivalent
DN15
Barrel — OD21.3 mm0.839 in
Long pattern — F76 mm2.99 in
Short pattern — F51 mm2.01 in
Lap dia — G35 mm1.38 in
Fillet radius — R3 mm0.118 in

Values are nominal, from ASME B16.9 Lap Joint Stub End Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

1/2 inch ASME B16.9 Lap Joint Stub End Dimensions: common questions

What are the 1/2 inch ASME B16.9 Lap Joint Stub End Dimensions?

1/2 inch (DN 15) to ASME B16.9: Barrel 21.3 mm; Long pattern 76 mm; Short pattern 51 mm; Lap dia 35 mm; Fillet radius 3 mm.

Does Teshi Group manufacture 1/2 inch butt weld fittings?

Yes. Teshi Group is an OEM manufacturer in India of butt weld fittings to ASME B16.9, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 1/2 inch dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full ASME B16.9 Lap Joint Stub End Dimensions chart.

Need 1/2 inch butt weld fittings?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote