34 inch ASME B16.9 Butt Weld Reducer Dimensions
34 inch (DN 850) to ASME B16.9: Small end NPS covered 32, 30, 26, 24 in; End to end 610 mm.
Key to dimensions
- H
- End-to-end length
34 inch ASME B16.9 Butt Weld Reducer Dimensions — all dimensions
Reducers — end-to-end length (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| Small end NPS covered | 32, 30, 26, 24 in | |
| End to end — H | 610 mm | 24.02 in |
Values are nominal, from ASME B16.9 Butt Weld Reducer Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — ASME B16.9 Butt Weld Reducer Dimensions
Related for this size
34" ASME B16.9 Butt Weld Elbow Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.934" ASME B16.9 Butt Weld Tee Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.934" ASME B16.9 Butt Weld Pipe Cap Dimensions
Same size — open the dimensions page.
View online · PDFASME B36.10M34" Pipe Schedule Chart — ASME B36.10M
Same size — open the dimensions page.
View online · PDFFAQ
34 inch ASME B16.9 Butt Weld Reducer Dimensions: common questions
What are the 34 inch ASME B16.9 Butt Weld Reducer Dimensions?
34 inch (DN 850) to ASME B16.9: Small end NPS covered 32, 30, 26, 24 in; End to end 610 mm.
Does Teshi Group manufacture 34 inch butt weld fittings?
Yes. Teshi Group is an OEM manufacturer in India of butt weld fittings to ASME B16.9, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the 34 inch dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full ASME B16.9 Butt Weld Reducer Dimensions chart.
Need 34 inch butt weld fittings?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.