ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
ASME B16.5FlangesTG-DS-003 · size page

16 inch ASME B16.5 Class 600 Flange Dimensions

16 inch (DN 400) to ASME B16.5: OD 685 mm; thickness 76.2 mm; raised face 469.9 mm; hub 495 mm; pipe OD 406.4 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
O = Ø685W (PCD) = Ø603.220 holes × Ø41.3tf = 76.2Y = 178X = Ø495A = Ø406.4R = Ø469.916 inch ASME B16.5 Class 600 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

O
Outside diameter of flange
tf
Minimum flange thickness (also the blind flange thickness), excluding the raised face
R
Diameter of raised face
X
Hub diameter at base
A
Hub diameter at the welding end of a weld neck flange (pipe outside diameter)
Y
Length through hub — given separately for weld neck, slip-on / threaded / socket weld and lap joint flanges
W
Bolt circle diameter
Holes
Number and diameter of bolt holes
Bolt
Nominal bolt diameter in inches

16 inch ASME B16.5 Class 600 Flange Dimensions — all dimensions

Class 600 flange dimensions (mm)

DimensionValueEquivalent
DN400
Outside dia — O685 mm26.97 in
Min thickness — tf76.2 mm3.00 in
Raised face dia — R469.9 mm18.50 in
Hub dia — X495 mm19.49 in
Hub at weld — A406.4 mm16.00 in
Weld neck — Y178 mm7.01 in
Slip-on / Thr / SW — Y106 mm4.17 in
Lap joint — Y140 mm5.51 in
Bolt circle — W603.2 mm23.75 in
Number of holes20
Hole dia41.3 mm1.63 in
Bolt size1½"

Class 600 bolting and approximate weights

DimensionValueEquivalent
Number of studs20
Stud dia1½"
Stud length — Raised face255 mm10.04 in
Stud length — Ring joint255 mm10.04 in
Slip-on — kg, approx.157 kg346.1 lb
Blind — kg, approx.231 kg509.3 lb

Values are nominal, from ASME B16.5 Class 600 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

16 inch ASME B16.5 Class 600 Flange Dimensions: common questions

What are the 16 inch ASME B16.5 Class 600 Flange Dimensions?

16 inch (DN 400) to ASME B16.5: OD 685 mm; thickness 76.2 mm; raised face 469.9 mm; hub 495 mm; pipe OD 406.4 mm.

Does Teshi Group manufacture 16 inch flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to ASME B16.5, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 16 inch dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full ASME B16.5 Class 600 Flange Dimensions chart.

Need 16 inch flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote