ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
ASME B16.5FlangesTG-DS-006 · size page

8 inch ASME B16.5 Class 2500 Flange Dimensions

8 inch (DN 200) to ASME B16.5: OD 550 mm; thickness 127.0 mm; raised face 269.9 mm; hub 305 mm; pipe OD 219.1 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
O = Ø550W (PCD) = Ø438.212 holes × Ø54.0tf = 127.0Y = 318X = Ø305A = Ø219.1R = Ø269.98 inch ASME B16.5 Class 2500 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

O
Outside diameter of flange
tf
Minimum flange thickness (also the blind flange thickness), excluding the raised face
R
Diameter of raised face
X
Hub diameter at base
A
Hub diameter at the welding end of a weld neck flange (pipe outside diameter)
Y
Length through hub — given separately for weld neck, slip-on / threaded / socket weld and lap joint flanges
W
Bolt circle diameter
Holes
Number and diameter of bolt holes
Bolt
Nominal bolt diameter in inches

8 inch ASME B16.5 Class 2500 Flange Dimensions — all dimensions

Class 2500 flange dimensions (mm)

DimensionValueEquivalent
DN200
Outside dia — O550 mm21.65 in
Min thickness — tf127.0 mm5.00 in
Raised face dia — R269.9 mm10.63 in
Hub dia — X305 mm12.01 in
Hub at weld — A219.1 mm8.63 in
Weld neck — Y318 mm12.52 in
Slip-on / Thr / SW — Y178 mm7.01 in
Lap joint — Y178 mm7.01 in
Bolt circle — W438.2 mm17.25 in
Number of holes12
Hole dia54.0 mm2.13 in
Bolt size2"

Class 2500 bolting and approximate weights

DimensionValueEquivalent
Number of studs12
Stud dia2"
Stud length — Raised face380 mm14.96 in
Stud length — Ring joint395 mm15.55 in
Weld neck — kg, approx.261 kg575.4 lb
Blind — kg, approx.241 kg531.3 lb

Values are nominal, from ASME B16.5 Class 2500 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

8 inch ASME B16.5 Class 2500 Flange Dimensions: common questions

What are the 8 inch ASME B16.5 Class 2500 Flange Dimensions?

8 inch (DN 200) to ASME B16.5: OD 550 mm; thickness 127.0 mm; raised face 269.9 mm; hub 305 mm; pipe OD 219.1 mm.

Does Teshi Group manufacture 8 inch flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to ASME B16.5, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 8 inch dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full ASME B16.5 Class 2500 Flange Dimensions chart.

Need 8 inch flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote