18 inch ASME B16.5 Class 150 Flange Dimensions
18 inch (DN 450) to ASME B16.5: OD 635 mm; thickness 38.1 mm; raised face 533.4 mm; hub 505 mm; pipe OD 457.0 mm.
Key to dimensions
- O
- Outside diameter of flange
- tf
- Minimum flange thickness (also the blind flange thickness), excluding the raised face
- R
- Diameter of raised face
- X
- Hub diameter at base
- A
- Hub diameter at the welding end of a weld neck flange (pipe outside diameter)
- Y
- Length through hub — given separately for weld neck, slip-on / threaded / socket weld and lap joint flanges
- W
- Bolt circle diameter
- Holes
- Number and diameter of bolt holes
- Bolt
- Nominal bolt diameter in inches
18 inch ASME B16.5 Class 150 Flange Dimensions — all dimensions
Class 150 flange dimensions (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| DN | 450 | |
| Outside dia — O | 635 mm | 25.00 in |
| Min thickness — tf | 38.1 mm | 1.50 in |
| Raised face dia — R | 533.4 mm | 21.00 in |
| Hub dia — X | 505 mm | 19.88 in |
| Hub at weld — A | 457.0 mm | 17.99 in |
| Weld neck — Y | 138 mm | 5.43 in |
| Slip-on / Thr / SW — Y | 67 mm | 2.64 in |
| Lap joint — Y | 97 mm | 3.82 in |
| Bolt circle — W | 577.9 mm | 22.75 in |
| Number of holes | 16 | |
| Hole dia | 31.8 mm | 1.25 in |
| Bolt size | 1⅛" |
Class 150 bolting and approximate weights
| Dimension | Value | Equivalent |
|---|---|---|
| Number of studs | 16 | |
| Stud dia | 1⅛" | |
| Stud length — Raised face | 145 mm | 5.71 in |
| Stud length — Ring joint | 160 mm | 6.30 in |
| Weld neck — kg, approx. | 74.8 kg | 164.9 lb |
| Slip-on — kg, approx. | 49.7 kg | 109.6 lb |
| Blind — kg, approx. | 94.8 kg | 209.0 lb |
Values are nominal, from ASME B16.5 Class 150 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — ASME B16.5 Class 150 Flange Dimensions
Same size in other ratings
Related for this size
18" Stud Bolt Chart for ASME B16.5 Flanges
Same size — open the dimensions page.
View online · PDFASME B16.2018" ASME B16.20 Spiral Wound Gasket Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.2118" ASME B16.21 Non-Metallic Flat Gasket Dimensions
Same size — open the dimensions page.
View online · PDFASME B36.10M18" Pipe Schedule Chart — ASME B36.10M
Same size — open the dimensions page.
View online · PDFFAQ
18 inch ASME B16.5 Class 150 Flange Dimensions: common questions
What are the 18 inch ASME B16.5 Class 150 Flange Dimensions?
18 inch (DN 450) to ASME B16.5: OD 635 mm; thickness 38.1 mm; raised face 533.4 mm; hub 505 mm; pipe OD 457.0 mm.
Does Teshi Group manufacture 18 inch flanges?
Yes. Teshi Group is an OEM manufacturer in India of flanges to ASME B16.5, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the 18 inch dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full ASME B16.5 Class 150 Flange Dimensions chart.
Need 18 inch flanges?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.