1200A JIS B2220 10K Flange Dimensions
1200A (DN 1200) to JIS B2220: pipe OD 1219.2 mm; OD 1465 mm; thickness 44(66) mm; raised face 1325 mm; PCD 1380 mm.
Key to dimensions
- D
- Outside diameter of flange
- A
- Pipe outside diameter (hub diameter at the weld end)
- C
- Flange thickness, excluding raised face unless stated
- d1
- Raised face diameter
- K
- Bolt circle (pitch circle) diameter
- n
- Number of bolts
- L
- Bolt hole diameter
- Bolt
- Bolt size (metric M or inch diameter)
1200A JIS B2220 10K Flange Dimensions — all dimensions
JIS B2220 10K — slip-on / blind flange dimensions (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| Pipe OD — A | 1219.2 mm | 48.00 in |
| Flange OD — D | 1465 mm | 57.68 in |
| Flange — C | 44(66) mm | 1.73 in |
| Raised face — d1 | 1325 mm | 52.17 in |
| Bolt circle — K | 1380 mm | 54.33 in |
| Number of bolts | 32 | |
| Hole dia — L | 39 mm | 1.54 in |
| Bolt size | M36 |
Values are nominal, from JIS B2220 10K Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
FAQ
1200A JIS B2220 10K Flange Dimensions: common questions
What are the 1200A JIS B2220 10K Flange Dimensions?
1200A (DN 1200) to JIS B2220: pipe OD 1219.2 mm; OD 1465 mm; thickness 44(66) mm; raised face 1325 mm; PCD 1380 mm.
Does Teshi Group manufacture 1200A flanges?
Yes. Teshi Group is an OEM manufacturer in India of flanges to JIS B2220, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the 1200A dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full JIS B2220 10K Flange Dimensions chart.
Need 1200A flanges?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.