21 inch BS 10 Table F Flange Dimensions
21 inch to BS 10: OD 30 in; thickness 2 in; PCD 27 1/2 in; bolts 24; holes 1 1/4 in.
Key to dimensions
- D
- Outside diameter of flange
- C
- Flange thickness, excluding raised face unless stated
- K
- Bolt circle (pitch circle) diameter
- n
- Number of bolts
- L
- Bolt hole diameter
- Bolt
- Bolt size (metric M or inch diameter)
21 inch BS 10 Table F Flange Dimensions — all dimensions
BS 10 Table F — flange dimensions
| Dimension | Value | Equivalent |
|---|---|---|
| Flange OD — D | 30 in | 762.0 mm |
| Steel, light series — C | 2 in | 50.8 mm |
| Bolt circle — K | 27 1/2 in | 698.5 mm |
| Number of bolts | 24 | |
| Hole dia — L | 1 1/4 in | 31.8 mm |
| Bolt size | 1 1/8 |
Values are nominal, from BS 10 Table F Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
FAQ
21 inch BS 10 Table F Flange Dimensions: common questions
What are the 21 inch BS 10 Table F Flange Dimensions?
21 inch to BS 10: OD 30 in; thickness 2 in; PCD 27 1/2 in; bolts 24; holes 1 1/4 in.
Does Teshi Group manufacture 21 inch flanges?
Yes. Teshi Group is an OEM manufacturer in India of flanges to BS 10, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the 21 inch dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full BS 10 Table F Flange Dimensions chart.
Need 21 inch flanges?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.