Corrugated Sheet Dealer & Supplier

Best Butt Weld Fittings Manufacturer in India since 1971.

corrugated plate
1 3

Corrugated Sheet

Being highly durable and robust with high tensile strength, corrugated metal sheets are widely used for residential and commercial purposes. From roofing to siding jobs, this sheet should ideally be your number one choice. Coming to their manufacturing process, corrugated sheets are prepared through the cold-form process. What happens during this process? Well, firstly, the sheets are pressed flat and then taken for roll forming to achieve the required shape and pattern. After this, the sheets are cut into the appropriate length. When you see a corrugated sheet, you may notice a wavy pattern. In fact, this is a characteristic feature of the sheet, which helps in its easy identification. That being said, there are also a few other patterns that you may come across.

We Export Corrugated Sheet to United States (USA), Canada, Germany, Japan, France, Middle-East, Bangladesh, Nepal etc.


Frequently Asked Questions

Most frequent questions and answers

What is a corrugated plate?

A three-dimensional or space structure is like a corrugated plate. Corrugated plates offer better resistance to both horizontal and vertical stresses.

Why are plates corrugated?

To make the fluid flow into the channels more turbulent, the surface of the plates is corrugated.

What are corrugated sheets used for?

The uses of corrugated sheets
These are sufficient causes for the architectural and building industries to like them. Because of this, corrugated sheets are used to construct a variety of roofs for buildings such as sheds, carports, stadiums, railway stations, schools, bus stops, and more.

A corrugated plate interceptor is what?

A gravity separator called the Corrugated Plate Interceptor is used. Oily wastewater is separated into a lighter oily fraction and a heavier water component using the CPI. The CPI will separate the heavy particles as well, and they will sink to the bottom.

What is CPI pit?

Most often, in an “Oily Water System,” free oil is separated from generated or effluent water or suspended particles using API and CPI separators (Corrugated Plate Interceptor) (OWS).

Why is a roof corrugated?

This is due to the straightforward structural stability and long-lasting nature of corrugated roof panels. When compared to a Standing Seam or R Panel made of the same base material, a corrugated metal panel has a structural advantage due to its natural form.

Why is corrugated metal stronger?

When corrugated metal is created, the metal is cold-worked past its yield point. As a result, the bent section of the metal is stronger and requires more effort to reach its new yield point.

More Products From Us



Teshi is a one stop solution for all engineering needs. With an experience of over 50 years we tend to provide best in class service, with unmatchable quality.

Reach Us

Ⓒ 2021 TESHI GROUPS. All rights reserved.
Designed By


Enquiry Form