45° Elbow Manufacturer
Best 45° Elbow Manufacturer in India since 1971.
Table of Contents
45° Elbow Manufacturers, Supplier and Exporter in India
Butt Weld (BW) End Capsor Buttweld (BW) Caps are usually welded to the pipe end or mounted on the external thread of the pipe end to cover the pipe fittings. To close the pipeline so the function is the same as the pipe plug.
We manufacture Galvanized Butt Weld Cap, Stainless steel (SS) Butt Weld Cap, Carbon steel (CS) Butt Weld Cap, MS Butt Weld Cap, Alloy Butt Weld Cap, Nicked Butt Weld Cap, Duplex stainless steel (DSS) Butt Weld Cap, Super Duplex stainless Steel (SDSS) Butt Weld Cap and Brass Butt Weld Cap.
We manufacture Butt Weld Cap as per ASME B16.5, ASME B16.47, DIN,etc.
We are manufacturers and suppliers Butt Weld Cap since the year 1971.
Teshi Group is an ISO certified 45° Elbow flange manufacturer & distributor in India
45° Elbow Dimensions
Standard Specification For 45° Elbow
ANSI ASTM A403 / ASME SA403, ANSI B16.9, ASME B16.25, ASME B16.28, MSS SP-43.
1/2" (15 NB) to 48" (1200NB)
Seamless / ERW / Welded / Fabricated
DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Elbow, 45 Deg Elbow, Long Radius Elbow, Short Radius Elbow, LR Elbow, SR Elbow.
Material & Grades of 45° Elbow
Material & Grades
Stainless Steel 45° Elbow
ASTM A403 WP316/316L, ASTM A403 WP304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
Duplex & Super Duplex Steel 45° Elbow
ASTM A 815, ASME SA 815 UNS NO S31803, S32205. UNS S32750, S32950. Werkstoff No. 1.4462
Carbon Steel 45° Elbow
ASTM A234, ASME SA234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
Low Temperature Carbon Steel 45° Elbow
ASTM A420 WPL3, A420 WPL6
Alloy Steel 45° Elbow
ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
Nickel Alloy 45° Elbow
ASTM B336, ASME SB336, Nickel 200 (UNS No. No2200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II), Cupro-Nickel 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe.
Application Of 45° Elbow
Stainless Steel 180° Buttweld Short Radius Elbow uses in Oil and Gas Pipeline
90° Buttweld SR Elbow uses in Chemical Industry
Alloy Steel Short Radius Elbow uses in Plumbing
Buttweld Short Radius Pipe Elbow uses in Heating
SR Buttweld Elbow uses in Water Supply Systems
ANSI B16.9 Buttweld Short Radius Elbow uses in Power Plant
ANSI B16.9 Buttweld Short Radius Elbow uses in Power Plant
45° Degree Short Radius Elbow uses in General Purpose Applications
Buttweld Short Radius Elbow uses in Fabrication Industry
Short Radius Elbow uses in Food Processing Industry
Buttweld Short Radius Elbow uses in Structural Pipe
45° Elbow Supplier in India
We supply 45° Elbow to Agra, Ahmedabad, Ajmer, Aligarh, Allahabad, Ambattur, Amravati, Amritsar, Asansol, Aurangabad, Bangalore, Bareilly, Belgaum, Bhavnagar, Bhilai Nagar, Bhiwandi, Bhopal, Bhubaneswar, Bikaner, Chandigarh, Chennai, Coimbatore, Cuttack, Dehradun, Delhi, Dhanbad, Durgapur, Faridabad, Firozabad, Gaya, Ghaziabad, Gorakhpur, Gulbarga, Guntur, Gurgaon, Guwahati, Gwalior, Haora, Hubli and Dharwad, Hyderabad, Indore, Jabalpur, Jaipur, Jalandhar, Jalgaon, Jammu, Jamnagar, Jamshedpur, Jhansi, Jodhpur, Kalyan & Dombivali, Kanpur, Karnataka, Kochi, Kolapur, Kolkata, Kota, Loni, Lucknow, Ludhiana, Madurai, Maheshtala, Malegoan, Mangalore, Meerut, Mira, Bhayander, Moradabad, Mumbai, Nagpur,Nanded Waghala, Nashik, Navi Mumbai, Nellore, Noida, Patna, Pimpri & Chinchwad, Pune, Raipur, Rajkot, Ranchi, Saharanpur, Salem, Sangli Miraj Kupwad, Siliguri, Solapur, Srinagar, Surat, Thane, Thiruvananthapuram, Tiruchirappalli, Tirunelveli, Udaipur, Ujjain, Ulhasnagar, Vadodara, Varanasi, Vasai Virar, Vijayawada, Visakhapatnam, Warangal.
45° Elbow Exporter to all major cities in the world
We export 45° Elbow to Seoul, Hanoi, Los Angeles, Rio de, Houston, York, Dammam, Al-Khobar, Bogota, Al-Jubail, Chiyoda, Abu Dhabi, Kuwait Santiago, Perth, Busan, London, Jakarta, Surat, Courbevoie, Dallas, Calgary, Mexico Muscat, Aberdeen, City, Edmonton, Riyadh, Caracas, Ahvaz, Brisbane, Moscow, Milan, Manama, Ulsan, Jaya, Granada, Vung Petaling, Melbourne, Montreal, Port-of-Spain, La Victoria, Istanbul, Janeiro, Karachi, New Singapore, Madrid, Lagos, Atyrau, Sydney, Kuala Dubai, City, Bangkok, Toronto, Gimhae-si, Lumpur, Jeddah, Pimpri-Chinchwad, Tehran, Doha, Ho-Chi-Minh-City, Algiers, Tau, Colombo, Ernakulam, Geoje-si, Cairo, Sharjah, Lahore.
Teshi exports 45° Elbow in more than 50 countries. We have shipments going out monthly to different countries for our newly acquired customers. Our ready stock of Flanges helps us ship the Flange and meet the requirement and demands of our customers as fast as possible.
We Export 45° Elbow to United States (USA), Canada, Germany, Japan, France, Middle-East, Bangladesh, Nepal etc.
ASME B16.9 ASME B16.28, AWWA, MSS : SP-43, DIN-2353, 150-4144 etc.
Frequently Asked Questions
Most frequent questions and answers
What is a 45-degree elbow?
A 45-degree elbow is a type of pipe fitting used to connect two pipes at a 45-degree angle. It is commonly used in plumbing and piping systems to change the direction of flow, allowing for tighter turns and more flexibility in the design of the system. The elbow is typically made of a durable material such as copper, steel, or PVC and can come in different sizes to fit different pipe diameters.
What is the purpose of a 45-degree elbow?
The purpose of a 45-degree elbow is to change the direction of flow in a piping or plumbing system by 45 degrees. It is used to connect two pipes at a 45-degree angle, allowing for tighter turns and more flexibility in the design of the system. This type of fitting is often used when space is limited and a standard 90-degree elbow would not fit, or when a slight change in direction is needed to align with other components in the system. In addition, a 45-degree elbow also helps to reduce turbulence and erosion in the flow and minimize pressure loss by maintaining an optimal flow trajectory.
What does a 45-degree elbow look like?
45-degree elbow is a type of pipe fitting that typically has the shape of a short, curved section of pipe with one end connecting to a pipe at a 45-degree angle and the other end connecting to another pipe. It has a curved section that forms an angle of 45 degrees and two straight sections that connect to the pipes. The curved section of the elbow is usually the same diameter as the connecting pipes, and the shape of the elbow allows for a smooth change in direction of the fluid flow. It can be made of various materials such as copper, steel, PVC, and more. It can also come in different sizes to fit different pipe diameters.
A 45-degree bend is what?
A 45-degree bend is a term used to describe a change in direction of a pipe or duct at a 45-degree angle. It is similar to a 45-degree elbow, which is a type of pipe fitting used to connect two pipes at a 45-degree angle. The term “bend” is often used to describe changes in direction that are made by bending a pipe or duct by hand, while a 45-degree elbow is a pre-fabricated fitting that is connected to the pipes. Both a 45-degree bend and a 45-degree elbow serve the same purpose, which is to change the direction of flow in a piping or ducting system by 45 degrees.
What is the radius of a 45-degree elbow?
The radius of a 45-degree elbow is the distance from the center of the elbow’s curvature to its outer edge. This radius is typically 1.5 times the diameter of the pipe it is used with, however, it may vary depending on the manufacturer and specific product. Also, in some cases, when working with larger pipes or high pressure systems, the radius of the bend is usually larger than 1.5 times the diameter of the pipe to reduce the stress in the elbow and to maintain the fluid flow rate. It is recommended to check the local codes and standards, as well as the specifications of the pipe and fitting manufacturer for the specific radius recommendations.
Are 45-degree elbows suitable for high pressure systems?
It depends on the size of the pipe and the pressure rating. Larger radius is used for larger pipes or in high pressure systems to reduce stress and maintain fluid flow rate. It is recommended to check the local codes and standards and the specifications of the pipe and fitting manufacturer.