Teshi PipeData
Gaskets · Centering ring outside diameter (mm)

Centering ring outside diameter (mm) 20"" — ASME B16.20

Centering ring outside diameter (mm) 20"" to ASME B16.20: dn 500, class 150 606.6 mm, class 300 654.1 mm, class 600 682.8 mm, class 900 698.5 mm.

Dimensions of Centering ring outside diameter (mm) 20""

SymbolDimensionValue
·DN500
·Class 150606.6 mm (23.882 in)
·Class 300654.1 mm (25.752 in)
·Class 600682.8 mm (26.882 in)
·Class 900698.5 mm (27.500 in)
·Class 1500755.7 mm (29.752 in)

SKU TSH-GASKET-ASME-B16-20-20" · Standard ASME B16.20 · teshi-web

Purchase description

CENTERING RING OUTSIDE DIAMETER (MM), 20"", SS316 + GRAPHITE, CS RINGS, ASME B16.20

Available materials: SS316 + graphite, CS rings, SS316 + PTFE, CNAF (non-asbestos), Neoprene / EPDM rubber, Soft iron / SS316 (ring joint).

Notes

Other sizes — Centering ring outside diameter (mm), Standard

Frequently asked questions

What are the main types of pipe flanges?

Weld neck (WN), slip-on (SO), blind (BL), socket weld (SW), threaded (THD), lap joint (LJ) and plate flanges. Special types include orifice, long weld neck, reducing flanges and spectacle blinds.

When should I use a weld neck flange instead of a slip-on?

Use weld neck flanges for high pressure, high or cycling temperature, and lines with vibration or fatigue loading. The tapered hub and full-penetration butt weld spread stress smoothly. Slip-on flanges are cheaper and easier to align, but their fatigue life is roughly one third of a WN.

What does Class 150, 300 or 600 mean on a flange?

The ASME class is a pressure-rating designation, not a pressure in psi. The allowable pressure depends on the material group and temperature. A Class 150 A105 flange is rated 19.6 bar at 38 °C but 13.8 bar at 200 °C.

Is a 150# flange rated for 150 psi?

No. A Class 150 carbon-steel flange is rated about 285 psi (19.6 bar) at ambient temperature, and about 170 psi (11.7 bar) at 260 °C. The "150" is a class number.

All piping FAQs →