Teshi PipeData
Gaskets · Centering ring outside diameter (mm)

Centering ring outside diameter (mm) 12"" — ASME B16.20

Centering ring outside diameter (mm) 12"" to ASME B16.20: dn 300, class 150 409.7 mm, class 300 422.4 mm, class 600 457.2 mm, class 900 498.6 mm.

Dimensions of Centering ring outside diameter (mm) 12""

SymbolDimensionValue
·DN300
·Class 150409.7 mm (16.130 in)
·Class 300422.4 mm (16.630 in)
·Class 600457.2 mm (18.000 in)
·Class 900498.6 mm (19.630 in)
·Class 1500520.7 mm (20.500 in)
·Class 2500549.4 mm (21.630 in)

SKU TSH-GASKET-ASME-B16-20-12" · Standard ASME B16.20 · teshi-web

Purchase description

CENTERING RING OUTSIDE DIAMETER (MM), 12"", SS316 + GRAPHITE, CS RINGS, ASME B16.20

Available materials: SS316 + graphite, CS rings, SS316 + PTFE, CNAF (non-asbestos), Neoprene / EPDM rubber, Soft iron / SS316 (ring joint).

Notes

Other sizes — Centering ring outside diameter (mm), Standard

Frequently asked questions

What are the main types of pipe flanges?

Weld neck (WN), slip-on (SO), blind (BL), socket weld (SW), threaded (THD), lap joint (LJ) and plate flanges. Special types include orifice, long weld neck, reducing flanges and spectacle blinds.

When should I use a weld neck flange instead of a slip-on?

Use weld neck flanges for high pressure, high or cycling temperature, and lines with vibration or fatigue loading. The tapered hub and full-penetration butt weld spread stress smoothly. Slip-on flanges are cheaper and easier to align, but their fatigue life is roughly one third of a WN.

What does Class 150, 300 or 600 mean on a flange?

The ASME class is a pressure-rating designation, not a pressure in psi. The allowable pressure depends on the material group and temperature. A Class 150 A105 flange is rated 19.6 bar at 38 °C but 13.8 bar at 200 °C.

Is a 150# flange rated for 150 psi?

No. A Class 150 carbon-steel flange is rated about 285 psi (19.6 bar) at ambient temperature, and about 170 psi (11.7 bar) at 260 °C. The "150" is a class number.

All piping FAQs →