Weldolet Dimensions ¾"" — MSS SP-97
Weldolet Dimensions ¾"" to MSS SP-97: a — height 22.2 mm, b — base width 41.3 mm, c — outlet od 30.2 mm.
Dimensions of Weldolet Dimensions ¾""
| Symbol | Dimension | Value |
|---|---|---|
| · | A — Height | 22.2 mm (0.874 in) |
| · | B — Base width | 41.3 mm (1.626 in) |
| · | C — Outlet OD | 30.2 mm (1.189 in) |
SKU TSH-FORGED-MSS-SP-97-¾" · Standard MSS SP-97 · teshi-web
Purchase description
WELDOLET DIMENSIONS, ¾"", ASTM A105N, MSS SP-97
Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11, ASTM A182 F22, ASTM A182 F51 (Duplex).
Notes
- Dimensions are in millimetres, for standard-weight (STD) Weldolets on a run pipe of the same nominal size.
- On a larger run pipe the base is contoured to that run size; the height A stays the same for a given outlet size and schedule.
- Extra-strong (XS) and Schedule 160 Weldolets are taller; their dimensions are supplied on request.
- Sockolet (socket weld) and Threadolet (NPT) outlets to MSS SP-97 are rated Class 3000 or 6000.
Other sizes — Weldolet Dimensions, Standard
Frequently asked questions
What is the difference between a long radius and short radius elbow?
A long radius (LR) elbow has a centre-line radius of 1.5 × NPS and is the default choice. A short radius (SR) elbow has a radius of 1.0 × NPS. SR elbows save space but add pressure drop and are not suitable for pigging.
What is the centre-to-end dimension of a 90° LR elbow?
For ASME B16.9 90° LR elbows the centre-to-end dimension A is 1.5 × NPS in inches. For example, a 6" elbow is 229 mm (9 in) and a 4" elbow is 152 mm (6 in).
What is the difference between a concentric and an eccentric reducer?
A concentric reducer keeps both ends on the same centre line. An eccentric reducer has one flat side. Eccentric reducers go on pump suctions with the flat side on top, so air pockets cannot form.
What is a 3D or 5D bend?
A bend whose centre-line radius is 3 or 5 times the nominal pipe size. They are usually made by induction bending and supplied with tangent lengths. 5D bends allow pigging in pipelines.