Union Dimensions 1" — MSS SP-83
Union Dimensions 1" to MSS SP-83: a — min 41.4 mm, c — min 4.55 mm, d — max 28.98 mm, d — min 27.74 mm, f — min 4.57 mm.
Dimensions of Union Dimensions 1"
| Symbol | Dimension | Value |
|---|---|---|
| · | A — min | 41.4 mm (1.630 in) |
| · | C — min | 4.55 mm (0.179 in) |
| · | D — max | 28.98 mm (1.141 in) |
| · | D — min | 27.74 mm (1.092 in) |
| · | F — min | 4.57 mm (0.180 in) |
| · | G — min | 4.45 mm (0.175 in) |
| · | J — min | 1.85 mm (0.073 in) |
| · | L — Laying length | 62 mm (2.441 in) |
| · | N | 78.7 mm (3.098 in) |
SKU TSH-FORGED-MSS-SP-83-1 · Standard MSS SP-83 · teshi-web
Purchase description
UNION DIMENSIONS, 1", ASTM A105N, MSS SP-83
Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11, ASTM A182 F22, ASTM A182 F51 (Duplex).
Notes
- All dimensions are in millimetres; letters follow the MSS SP-83 figure.
- Values are nominal dimensions from the standard; a dash (—) means the value is not listed. Verify against the current edition before design, purchase or fabrication.
Other sizes — Union Dimensions, Standard
Frequently asked questions
What is the difference between a long radius and short radius elbow?
A long radius (LR) elbow has a centre-line radius of 1.5 × NPS and is the default choice. A short radius (SR) elbow has a radius of 1.0 × NPS. SR elbows save space but add pressure drop and are not suitable for pigging.
What is the centre-to-end dimension of a 90° LR elbow?
For ASME B16.9 90° LR elbows the centre-to-end dimension A is 1.5 × NPS in inches. For example, a 6" elbow is 229 mm (9 in) and a 4" elbow is 152 mm (6 in).
What is the difference between a concentric and an eccentric reducer?
A concentric reducer keeps both ends on the same centre line. An eccentric reducer has one flat side. Eccentric reducers go on pump suctions with the flat side on top, so air pockets cannot form.
What is a 3D or 5D bend?
A bend whose centre-line radius is 3 or 5 times the nominal pipe size. They are usually made by induction bending and supplied with tangent lengths. 5D bends allow pigging in pipelines.