Teshi PipeData
Forged fittings · Threaded elbows, tees and crosses (mm)

Threaded elbows, tees and crosses (mm) 2"" — ASME B16.11

Threaded elbows, tees and crosses (mm) 2"" to ASME B16.11: dn 50, a — 2000 60 mm, a — 3000 64 mm, a — 6000 83 mm, c 45° — 2000 43 mm.

Dimensions of Threaded elbows, tees and crosses (mm) 2""

SymbolDimensionValue
·DN50
·A — 200060 mm (2.362 in)
·A — 300064 mm (2.520 in)
·A — 600083 mm (3.268 in)
·C 45° — 200043 mm (1.693 in)
·C 45° — 300044 mm (1.732 in)
·C 45° — 600052 mm (2.047 in)
·H — 200075 mm (2.953 in)
·H — 300084 mm (3.307 in)
·H — 6000102 mm (4.016 in)
·B — Thread length19 mm (0.748 in)
·L2 — Effective thread19.2 mm (0.756 in)

SKU TSH-FORGED-ASME-B16-11-2" · Standard ASME B16.11 · teshi-web

Purchase description

THREADED ELBOWS, TEES AND CROSSES (MM), 2"", ASTM A105N, ASME B16.11

Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11, ASTM A182 F22, ASTM A182 F51 (Duplex).

Notes

Other sizes — Threaded elbows, tees and crosses (mm), Standard

Frequently asked questions

What is the difference between a long radius and short radius elbow?

A long radius (LR) elbow has a centre-line radius of 1.5 × NPS and is the default choice. A short radius (SR) elbow has a radius of 1.0 × NPS. SR elbows save space but add pressure drop and are not suitable for pigging.

What is the centre-to-end dimension of a 90° LR elbow?

For ASME B16.9 90° LR elbows the centre-to-end dimension A is 1.5 × NPS in inches. For example, a 6" elbow is 229 mm (9 in) and a 4" elbow is 152 mm (6 in).

What is the difference between a concentric and an eccentric reducer?

A concentric reducer keeps both ends on the same centre line. An eccentric reducer has one flat side. Eccentric reducers go on pump suctions with the flat side on top, so air pockets cannot form.

What is a 3D or 5D bend?

A bend whose centre-line radius is 3 or 5 times the nominal pipe size. They are usually made by induction bending and supplied with tangent lengths. 5D bends allow pigging in pipelines.

All piping FAQs →