Teshi PipeData
Forged fittings · Socket weld elbows, tees and crosses (mm)

Socket weld elbows, tees and crosses (mm) 2"" — ASME B16.11

Socket weld elbows, tees and crosses (mm) 2"" to ASME B16.11: dn 50, b — socket bore 61.45 mm, j — socket depth 16 mm, a 90° — 3000 38 mm, a 90° — 6000 41 mm.

Dimensions of Socket weld elbows, tees and crosses (mm) 2""

SymbolDimensionValue
·DN50
·B — Socket bore61.45 mm (2.419 in)
·J — Socket depth16 mm (0.630 in)
·A 90° — 300038 mm (1.496 in)
·A 90° — 600041 mm (1.614 in)
·A 90° — 900054 mm (2.126 in)
·A 45° — 300025.5 mm (1.004 in)
·A 45° — 600028.5 mm (1.122 in)
·A 45° — 900028.5 mm (1.122 in)
·C min — 30006.04 mm (0.238 in)
·C min — 60009.5 mm (0.374 in)
·C min — 900012.12 mm (0.477 in)
·D — 300052.5 mm (2.067 in)
·D — 600042.85 mm (1.687 in)
·D — 900038.15 mm (1.502 in)

SKU TSH-FORGED-ASME-B16-11-2" · Standard ASME B16.11 · teshi-web

Purchase description

SOCKET WELD ELBOWS, TEES AND CROSSES (MM), 2"", ASTM A105N, ASME B16.11

Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11, ASTM A182 F22, ASTM A182 F51 (Duplex).

Notes

Other sizes — Socket weld elbows, tees and crosses (mm), Standard

Frequently asked questions

What is the difference between a long radius and short radius elbow?

A long radius (LR) elbow has a centre-line radius of 1.5 × NPS and is the default choice. A short radius (SR) elbow has a radius of 1.0 × NPS. SR elbows save space but add pressure drop and are not suitable for pigging.

What is the centre-to-end dimension of a 90° LR elbow?

For ASME B16.9 90° LR elbows the centre-to-end dimension A is 1.5 × NPS in inches. For example, a 6" elbow is 229 mm (9 in) and a 4" elbow is 152 mm (6 in).

What is the difference between a concentric and an eccentric reducer?

A concentric reducer keeps both ends on the same centre line. An eccentric reducer has one flat side. Eccentric reducers go on pump suctions with the flat side on top, so air pockets cannot form.

What is a 3D or 5D bend?

A bend whose centre-line radius is 3 or 5 times the nominal pipe size. They are usually made by induction bending and supplied with tangent lengths. 5D bends allow pigging in pipelines.

All piping FAQs →