Teshi PipeData
Flanges · Plate & blind flange

Plate & blind flange NB 300 PN25 — IS 9523

Plate & blind flange NB 300 PN25 to IS 9523: outside dia 485 mm, pcd 430 mm, no. of holes 16, hole dia 31 mm, rf dia 389 mm.

RWOtfSECTIONn × hFACE VIEW
Plate & blind flange NB 300 PN25 — dimension symbols match the table below. © Teshi Group · www.teshigroup.com

Dimensions of Plate & blind flange NB 300 PN25

SymbolDimensionValue
ODOutside dia485 mm (19.094 in)
·PCD430 mm (16.929 in)
·No. of holes16
·Hole dia31 mm (1.220 in)
·RF dia389 mm (15.315 in)
·RF height4 mm (0.157 in)
·Bore / ID (plate)326.9 mm (12.870 in)
·Thickness — plate RF27.5 mm (1.083 in)
·Thickness — plate FF23.5 mm (0.925 in)
·Thickness — blind RF27.5 mm (1.083 in)
·Thickness — blind FF23.5 mm (0.925 in)
·Teshi QC flagSTD~ID

SKU TSH-FLANGE-IS-9523-PN25-300 · Standard IS 9523 · Teshi master data

Purchase description

PLATE & BLIND FLANGE, NB 300, PN25, ASTM A105N, IS 9523

Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11 Cl 2, ASTM A182 F22 Cl 3, ASTM A182 F51 (Duplex), ASTM A182 F53 (Super Duplex), ASTM A694 F52 / F60, IS 2062 E250 (plate).

Same size, other ratings

Other sizes — Plate & blind flange, PN25

Frequently asked questions

What are the main types of pipe flanges?

Weld neck (WN), slip-on (SO), blind (BL), socket weld (SW), threaded (THD), lap joint (LJ) and plate flanges. Special types include orifice, long weld neck, reducing flanges and spectacle blinds.

When should I use a weld neck flange instead of a slip-on?

Use weld neck flanges for high pressure, high or cycling temperature, and lines with vibration or fatigue loading. The tapered hub and full-penetration butt weld spread stress smoothly. Slip-on flanges are cheaper and easier to align, but their fatigue life is roughly one third of a WN.

What does Class 150, 300 or 600 mean on a flange?

The ASME class is a pressure-rating designation, not a pressure in psi. The allowable pressure depends on the material group and temperature. A Class 150 A105 flange is rated 19.6 bar at 38 °C but 13.8 bar at 200 °C.

Is a 150# flange rated for 150 psi?

No. A Class 150 carbon-steel flange is rated about 285 psi (19.6 bar) at ambient temperature, and about 170 psi (11.7 bar) at 260 °C. The "150" is a class number.

All piping FAQs →