Teshi PipeData
Flanges · Plate & blind flange

Plate & blind flange NB 1200 PN25 — IS 9523

Plate & blind flange NB 1200 PN25 to IS 9523: outside dia 1530 mm, pcd 1420 mm, no. of holes 32, hole dia 56 mm, rf dia 1350 mm.

RWOtfSECTIONn × hFACE VIEW
Plate & blind flange NB 1200 PN25 — dimension symbols match the table below. © Teshi Group · www.teshigroup.com

Dimensions of Plate & blind flange NB 1200 PN25

SymbolDimensionValue
ODOutside dia1530 mm (60.236 in)
·PCD1420 mm (55.906 in)
·No. of holes32
·Hole dia56 mm (2.205 in)
·RF dia1350 mm (53.150 in)
·RF height5 mm (0.197 in)
·Bore / ID (plate)1223 mm (48.150 in)
·Thickness — plate RF69 mm (2.717 in)
·Thickness — plate FF64 mm (2.520 in)
·Thickness — blind RF69 mm (2.717 in)
·Thickness — blind FF64 mm (2.520 in)
·Teshi QC flagSTD~ID

SKU TSH-FLANGE-IS-9523-PN25-1200 · Standard IS 9523 · Teshi master data

Purchase description

PLATE & BLIND FLANGE, NB 1200, PN25, ASTM A105N, IS 9523

Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11 Cl 2, ASTM A182 F22 Cl 3, ASTM A182 F51 (Duplex), ASTM A182 F53 (Super Duplex), ASTM A694 F52 / F60, IS 2062 E250 (plate).

Same size, other ratings

Other sizes — Plate & blind flange, PN25

Frequently asked questions

What are the main types of pipe flanges?

Weld neck (WN), slip-on (SO), blind (BL), socket weld (SW), threaded (THD), lap joint (LJ) and plate flanges. Special types include orifice, long weld neck, reducing flanges and spectacle blinds.

When should I use a weld neck flange instead of a slip-on?

Use weld neck flanges for high pressure, high or cycling temperature, and lines with vibration or fatigue loading. The tapered hub and full-penetration butt weld spread stress smoothly. Slip-on flanges are cheaper and easier to align, but their fatigue life is roughly one third of a WN.

What does Class 150, 300 or 600 mean on a flange?

The ASME class is a pressure-rating designation, not a pressure in psi. The allowable pressure depends on the material group and temperature. A Class 150 A105 flange is rated 19.6 bar at 38 °C but 13.8 bar at 200 °C.

Is a 150# flange rated for 150 psi?

No. A Class 150 carbon-steel flange is rated about 285 psi (19.6 bar) at ambient temperature, and about 170 psi (11.7 bar) at 260 °C. The "150" is a class number.

All piping FAQs →