Teshi PipeData
Flanges · Blind

Blind Flange RF 16" Class 1500 — ASME B16.5

Blind Flange RF 16" Class 1500 to ASME B16.5: outside diameter 825 mm, flange thickness, min 146.1 mm, raised face diameter 469.9 mm, raised face height 6.4 mm, bolt circle (pcd) 704.8 mm; approx. weight 557.7 kg.

RWOtfSECTIONn × hFACE VIEW
Blind Flange RF 16" Class 1500 — dimension symbols match the table below. © Teshi Group · www.teshigroup.com

Dimensions of Blind Flange RF 16" Class 1500

SymbolDimensionValue
OOutside diameter825 mm (32.480 in)
tfFlange thickness, min146.1 mm (5.752 in)
RRaised face diameter469.9 mm (18.500 in)
fRaised face height6.4 mm (0.252 in)
WBolt circle (PCD)704.8 mm (27.748 in)
nNumber of bolt holes16
hBolt hole diameter66.7 mm (2.626 in)
dStud bolt size2-1/2"
mApproximate weight557.7 kg (1229.52 lb)

SKU TSH-FLANGE-BL-B165-1500-16 · Standard ASME B16.5 · weight: Calculated from nominal dimensions, carbon steel (ρ 7850 kg/m³)

Purchase description

FLANGE, BLIND, RAISED FACE, 16" (DN 400), CLASS 1500, ASTM A105N, ASME B16.5

Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11 Cl 2, ASTM A182 F22 Cl 3, ASTM A182 F51 (Duplex), ASTM A182 F53 (Super Duplex), ASTM A694 F52 / F60, IS 2062 E250 (plate).

Bolting and gasket

16 stud bolts 2-1/2" UNC × 480 mm (19") with 32 heavy hex nuts — ASTM A193 B7 studs + A194 2H heavy hex nuts. Gasket: Spiral wound 16" Class 1500, ASME B16.20, SS316 + graphite, CS outer ring, SS inner ring.

Additional data

FacingRaised face 6.4 mm, 3.2–6.3 µm Ra serrated

Same size, other ratings

Other sizes — Blind, Class 1500

Frequently asked questions

What are the main types of pipe flanges?

Weld neck (WN), slip-on (SO), blind (BL), socket weld (SW), threaded (THD), lap joint (LJ) and plate flanges. Special types include orifice, long weld neck, reducing flanges and spectacle blinds.

When should I use a weld neck flange instead of a slip-on?

Use weld neck flanges for high pressure, high or cycling temperature, and lines with vibration or fatigue loading. The tapered hub and full-penetration butt weld spread stress smoothly. Slip-on flanges are cheaper and easier to align, but their fatigue life is roughly one third of a WN.

What does Class 150, 300 or 600 mean on a flange?

The ASME class is a pressure-rating designation, not a pressure in psi. The allowable pressure depends on the material group and temperature. A Class 150 A105 flange is rated 19.6 bar at 38 °C but 13.8 bar at 200 °C.

Is a 150# flange rated for 150 psi?

No. A Class 150 carbon-steel flange is rated about 285 psi (19.6 bar) at ambient temperature, and about 170 psi (11.7 bar) at 260 °C. The "150" is a class number.

All piping FAQs →