Reducing outlet tees (mm) Run NPS 12" — ASME B16.9
Reducing outlet tees (mm) Run NPS 12" to ASME B16.9: c — run 254 mm, m — outlet 241 mm.
Dimensions of Reducing outlet tees (mm) Run NPS 12"
| Symbol | Dimension | Value |
|---|---|---|
| · | Outlet NPS — in | 10" |
| · | C — Run | 254 mm (10.000 in) |
| · | M — Outlet | 241 mm (9.488 in) |
SKU TSH-BW-ASME-B16-9-12" · Standard ASME B16.9 · teshi-web
Purchase description
REDUCING OUTLET TEES (MM), Run NPS 12", ASTM A234 WPB, ASME B16.9
Available materials: ASTM A234 WPB, ASTM A420 WPL6, ASTM A403 WP304/304L, ASTM A403 WP316/316L, ASTM A234 WP11, ASTM A234 WP22, ASTM A234 WP91, ASTM A815 UNS S31803.
Notes
- Dimensions are in millimetres unless stated otherwise.
- For straight tees above NPS 24" the outlet dimension M is as tabulated and may be less than C.
Other sizes — Reducing outlet tees (mm), Standard
Run NPS ½"Run NPS ½"Run NPS ¾"Run NPS ¾"Run NPS 1"Run NPS 1"Run NPS 1¼"Run NPS 1¼"Run NPS 1¼"Run NPS 1½"Run NPS 1½"Run NPS 1½"Run NPS 1½"Run NPS 2"Run NPS 2"Run NPS 2"Run NPS 2"Run NPS 2½"Run NPS 2½"Run NPS 2½"Run NPS 2½"Run NPS 3"Run NPS 3"Run NPS 3"Run NPS 3"Run NPS 3½"Run NPS 3½"Run NPS 3½"Run NPS 3½"Run NPS 4"Run NPS 4"Run NPS 4"Run NPS 4"Run NPS 4"Run NPS 5"Run NPS 5"Run NPS 5"Run NPS 5"Run NPS 5"Run NPS 6"Run NPS 6"Run NPS 6"Run NPS 6"Run NPS 6"Run NPS 8"Run NPS 8"Run NPS 8"Run NPS 8"Run NPS 10"Run NPS 10"Run NPS 10"Run NPS 10"Run NPS 12"Run NPS 12"Run NPS 12"Run NPS 14"Run NPS 14"Run NPS 14"Run NPS 14"Run NPS 16"Run NPS 16"Run NPS 16"Run NPS 16"Run NPS 16"Run NPS 18"Run NPS 18"Run NPS 18"Run NPS 18"Run NPS 18"Run NPS 20"Run NPS 20"Run NPS 20"Run NPS 20"Run NPS 20"Run NPS 20"Run NPS 22"Run NPS 22"Run NPS 22"Run NPS 22"Run NPS 22"Run NPS 22"Run NPS 24"Run NPS 24"Run NPS 24"Run NPS 24"Run NPS 24"Run NPS 24"Run NPS 24"
Frequently asked questions
What is the difference between a long radius and short radius elbow?
A long radius (LR) elbow has a centre-line radius of 1.5 × NPS and is the default choice. A short radius (SR) elbow has a radius of 1.0 × NPS. SR elbows save space but add pressure drop and are not suitable for pigging.
What is the centre-to-end dimension of a 90° LR elbow?
For ASME B16.9 90° LR elbows the centre-to-end dimension A is 1.5 × NPS in inches. For example, a 6" elbow is 229 mm (9 in) and a 4" elbow is 152 mm (6 in).
What is the difference between a concentric and an eccentric reducer?
A concentric reducer keeps both ends on the same centre line. An eccentric reducer has one flat side. Eccentric reducers go on pump suctions with the flat side on top, so air pockets cannot form.
What is a 3D or 5D bend?
A bend whose centre-line radius is 3 or 5 times the nominal pipe size. They are usually made by induction bending and supplied with tangent lengths. 5D bends allow pigging in pipelines.