EN 10253 / DIN 2616 Reducer Dimensions DN 800 — EN 10253-2
EN 10253 / DIN 2616 Reducer Dimensions DN 800 to EN 10253-2: d — large od 813 mm, dn1 — small 700, d1 — small od 711 mm, l — length 610 mm.
Dimensions of EN 10253 / DIN 2616 Reducer Dimensions DN 800
| Symbol | Dimension | Value |
|---|---|---|
| · | D — Large OD | 813 mm (32.008 in) |
| · | DN1 — Small | 700 |
| · | D1 — Small OD | 711 mm (27.992 in) |
| · | L — Length | 610 mm (24.016 in) |
SKU TSH-BW-EN-10253-2-800 · Standard EN 10253-2 · teshi-web
Purchase description
EN 10253 / DIN 2616 REDUCER DIMENSIONS, DN 800, ASTM A234 WPB, EN 10253-2
Available materials: ASTM A234 WPB, ASTM A420 WPL6, ASTM A403 WP304/304L, ASTM A403 WP316/316L, ASTM A234 WP11, ASTM A234 WP22, ASTM A234 WP91, ASTM A815 UNS S31803.
Notes
- All dimensions are in millimetres.
- Concentric and eccentric reducers have the same length L.
- Values are nominal dimensions from the standard; a dash (—) means the value is not listed. Verify against the current edition before design, purchase or fabrication.
Other sizes — EN 10253 / DIN 2616 Reducer Dimensions, Standard
DN 20DN 25DN 25DN 32DN 32DN 32DN 40DN 40DN 40DN 50DN 50DN 50DN 50DN 65DN 65DN 65DN 65DN 80DN 80DN 80DN 80DN 100DN 100DN 100DN 100DN 125DN 125DN 125DN 125DN 150DN 150DN 150DN 150DN 200DN 200DN 200DN 200DN 250DN 250DN 250DN 250DN 300DN 300DN 300DN 300DN 350DN 350DN 350DN 350DN 400DN 400DN 400DN 400DN 450DN 450DN 450DN 450DN 500DN 500DN 500DN 500DN 550DN 550DN 550DN 550DN 600DN 600DN 600DN 600DN 700DN 700DN 700DN 800DN 800DN 800DN 900DN 900DN 900DN 1000DN 1000DN 1000DN 1200DN 1200DN 1200
Frequently asked questions
What is the difference between a long radius and short radius elbow?
A long radius (LR) elbow has a centre-line radius of 1.5 × NPS and is the default choice. A short radius (SR) elbow has a radius of 1.0 × NPS. SR elbows save space but add pressure drop and are not suitable for pigging.
What is the centre-to-end dimension of a 90° LR elbow?
For ASME B16.9 90° LR elbows the centre-to-end dimension A is 1.5 × NPS in inches. For example, a 6" elbow is 229 mm (9 in) and a 4" elbow is 152 mm (6 in).
What is the difference between a concentric and an eccentric reducer?
A concentric reducer keeps both ends on the same centre line. An eccentric reducer has one flat side. Eccentric reducers go on pump suctions with the flat side on top, so air pockets cannot form.
What is a 3D or 5D bend?
A bend whose centre-line radius is 3 or 5 times the nominal pipe size. They are usually made by induction bending and supplied with tangent lengths. 5D bends allow pigging in pipelines.