Spade & ring spacer 1" Class 300 (partial) — ASME B16.48
Spade & ring spacer 1" Class 300 (partial) to ASME B16.48: outside dia. a 70 mm, inside dia. b (spacer) 27 mm, centre to handle end c 139 mm, thickness t 6.4 mm, handle width w 32 mm.
Dimensions of Spade & ring spacer 1" Class 300 (partial)
| Symbol | Dimension | Value |
|---|---|---|
| A | Outside dia | 70 mm (2.756 in) |
| B | Inside dia. (spacer) | 27 mm (1.063 in) |
| C | Centre to handle end | 139 mm (5.472 in) |
| t | Thickness | 6.4 mm (0.252 in) |
| W | Handle width | 32 mm (1.260 in) |
SKU TSH-BLANK-ASME-B16-48-CLASS-300-PARTIAL-1 · Standard ASME B16.48 · single source — verify
Purchase description
SPADE & RING SPACER, 1", CLASS 300 (PARTIAL), ASTM A105N, ASME B16.48
Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11 Cl 2, ASTM A182 F22 Cl 3, ASTM A182 F51 (Duplex), ASTM A182 F53 (Super Duplex), ASTM A694 F52 / F60, IS 2062 E250 (plate).
Same size, other ratings
Other sizes — Spade & ring spacer, Class 300 (partial)
Frequently asked questions
What are the main types of pipe flanges?
Weld neck (WN), slip-on (SO), blind (BL), socket weld (SW), threaded (THD), lap joint (LJ) and plate flanges. Special types include orifice, long weld neck, reducing flanges and spectacle blinds.
When should I use a weld neck flange instead of a slip-on?
Use weld neck flanges for high pressure, high or cycling temperature, and lines with vibration or fatigue loading. The tapered hub and full-penetration butt weld spread stress smoothly. Slip-on flanges are cheaper and easier to align, but their fatigue life is roughly one third of a WN.
What does Class 150, 300 or 600 mean on a flange?
The ASME class is a pressure-rating designation, not a pressure in psi. The allowable pressure depends on the material group and temperature. A Class 150 A105 flange is rated 19.6 bar at 38 °C but 13.8 bar at 200 °C.
Is a 150# flange rated for 150 psi?
No. A Class 150 carbon-steel flange is rated about 285 psi (19.6 bar) at ambient temperature, and about 170 psi (11.7 bar) at 260 °C. The "150" is a class number.