MSS SP-95 — MSS SP-95 swage nipples (inches)
MSS SP-95 MSS SP-95 swage nipples (inches) — 77 sizes.
| NPS | OD — Large end · in (in) | OD1 — Small end · in (in) | A — Length · in (in) |
|---|---|---|---|
| 1/4 x 1/8 | 0.54 | 0.405 | 2.25 |
| 3/8 x 1/8 | 0.675 | 0.405 | 2.5 |
| 3/8 x 1/4 | 0.675 | 0.54 | 2.5 |
| 1/2 x 1/8 | 0.84 | 0.405 | 2.75 |
| 1/2 x 1/4 | 0.84 | 0.54 | 2.75 |
| 1/2 x 3/8 | 0.84 | 0.675 | — |
| 3/4 x 1/8 | 1.05 | 0.405 | 3 |
| 3/4 x 1/4 | 1.05 | 0.54 | 3 |
| 3/4 x 3/8 | 1.05 | 0.675 | 3 |
| 3/4 x 1/2 | 1.05 | 0.84 | 3 |
| 1 x 1/8 | 1.315 | 0.405 | 3.5 |
| 1 x 1/4 | 1.315 | 0.54 | 3.5 |
| 1 x 3/8 | 1.315 | 0.675 | 3.5 |
| 1 x 1/2 | 1.315 | 0.84 | 3.5 |
| 1 x 3/4 | 1.315 | 1.05 | 3.5 |
| 1 1/4 x 1/8 | 1.66 | 0.405 | 4 |
| 1 1/4 x 1/4 | 1.66 | 0.54 | 4 |
| 1 1/4 x 3/8 | 1.66 | 0.675 | 4 |
| 1 1/4 x 1/2 | 1.66 | 0.84 | 4 |
| 1 1/4 x 3/4 | 1.66 | 1.05 | 4 |
| 1 1/4 x 1 | 1.66 | 1.315 | 4 |
| 1 1/2 x 1/8 | 1.9 | 0.405 | 4.5 |
| 1 1/2 x 1/4 | 1.9 | 0.54 | 4.5 |
| 1 1/2 x 3/8 | 1.9 | 0.675 | 4.5 |
| 1 1/2 x 1/2 | 1.9 | 0.84 | 4.5 |
| 1 1/2 x 3/4 | 1.9 | 1.05 | 4.5 |
| 1 1/2 x 1 | 1.9 | 1.315 | 4.5 |
| 1 1/2 x 1 1/4 | 1.9 | 1.66 | 4.5 |
| 2 x 1/8 | 2.375 | 0.405 | 6.5 |
| 2 x 1/4 | 2.375 | 0.54 | 6.5 |
| 2 x 3/8 | 2.375 | 0.675 | 6.5 |
| 2 x 1/2 | 2.375 | 0.84 | 6.5 |
| 2 x 3/4 | 2.375 | 1.05 | 6.5 |
| 2 x 1 | 2.375 | 1.315 | 6.5 |
| 2 x 1 1/4 | 2.375 | 1.66 | 6.5 |
| 2 x 1 1/2 | 2.375 | 1.9 | 6.5 |
| 2 1/2 x 1/8 | 2.875 | 0.405 | 7 |
| 2 1/2 x 1/4 | 2.875 | 0.54 | 7 |
| 2 1/2 x 3/8 | 2.875 | 0.675 | 7 |
| 2 1/2 x 1/2 | 2.875 | 0.84 | 7 |
| 2 1/2 x 3/4 | 2.875 | 1.05 | 7 |
| 2 1/2 x 1 | 2.875 | 1.315 | 7 |
| 2 1/2 x 1 1/4 | 2.875 | 1.66 | 7 |
| 2 1/2 x 1 1/2 | 2.875 | 1.9 | 7 |
| 2 1/2 x 2 | 2.875 | 2.375 | 7 |
| 3 x 1/8 | 3.5 | 0.405 | 8 |
| 3 x 1/4 | 3.5 | 0.54 | 8 |
| 3 x 3/8 | 3.5 | 0.675 | 8 |
| 3 x 1/2 | 3.5 | 0.84 | 8 |
| 3 x 3/4 | 3.5 | 1.05 | 8 |
| 3 x 1 | 3.5 | 1.315 | 8 |
| 3 x 1 1/4 | 3.5 | 1.66 | 8 |
| 3 x 1 1/2 | 3.5 | 1.9 | 8 |
| 3 x 2 | 3.5 | 2.375 | 8 |
| 3 x 2 1/2 | 3.5 | 2.875 | 8 |
| 3 1/2 x 1/8 | 4 | 0.405 | 8 |
| 3 1/2 x 1/4 | 4 | 0.54 | 8 |
| 3 1/2 x 3/8 | 4 | 0.675 | 8 |
| 3 1/2 x 1/2 | 4 | 0.84 | 8 |
| 3 1/2 x 3/4 | 4 | 1.05 | 8 |
| 3 1/2 x 1 | 4 | 1.315 | 8 |
| 3 1/2 x 1 1/4 | 4 | 1.66 | 8 |
| 3 1/2 x 1 1/2 | 4 | 1.9 | 8 |
| 3 1/2 x 2 | 4 | 2.375 | 8 |
| 3 1/2 x 2 1/2 | 4 | 2.875 | 8 |
| 3 1/2 x 3 | 4 | 3.5 | 8 |
| 4 x 1/4 | 4.5 | 0.54 | 9 |
| 4 x 3/8 | 4.5 | 0.675 | 9 |
| 4 x 1/2 | 4.5 | 0.84 | 9 |
| 4 x 3/4 | 4.5 | 1.05 | 9 |
| 4 x 1 | 4.5 | 1.315 | 9 |
| 4 x 1 1/4 | 4.5 | 1.66 | 9 |
| 4 x 1 1/2 | 4.5 | 1.9 | 9 |
| 4 x 2 | 4.5 | 2.375 | 9 |
| 4 x 2 1/2 | 4.5 | 2.875 | 9 |
| 4 x 3 | 4.5 | 3.5 | 9 |
| 4 x 3 1/2 | 4.5 | 4 | 9 |
- All dimensions are in inches (1 in = 25.4 mm).
- Concentric and eccentric swage nipples have the same end-to-end length A.
- Values are nominal dimensions from the standard; a dash (—) means the value is not listed. Verify against the current edition before design, purchase or fabrication.