IS 6392 — PN 25 (Table 22 weld-neck + Table 25 blind) — thickness, neck and drilling
IS 6392 PN 25 (Table 22 weld-neck + Table 25 blind) — thickness, neck and drilling — 12 sizes.
| Size | A — Pipe OD (mm) | D — Flange OD (mm) | C — Weld neck (mm) | H — WN length (mm) | N — Hub / neck dia (mm) | d1 — Raised face (mm) | f — RF height (mm) | K — Bolt circle (mm) | n — Bolts | L — Hole dia (mm) | Bolt — Size | C — Blind (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 175 | 193.7 | 330 | 28 | 75 | 218 | 248 | 3 | 280 | 12 | 26 | M24 | 28 |
| 200 | 219.1 | 360 | 30 | 80 | 244 | 278 | 3 | 310 | 12 | 26 | M24 | 30 |
| 250 | 273 | 425 | 32 | — | 298 | 335 | 3 | 370 | 12 | 30 | M27 | 32 |
| 300 | 323.9 | 485 | 34 | 92 | 352 | 395 | 4 | 430 | 16 | 30 | M27 | 34 |
| 350 | 355.6 | 555 | 38 | 100 | 398 | 450 | 4 | 490 | 16 | 33 | M30 | 38 |
| 400 | 406.4 | 620 | 40 | 110 | 452 | 505 | 4 | 550 | 16 | 36 | M33 | 40 |
| 500 | 508 | 730 | 44 | 125 | 558 | 615 | 4 | 660 | 20 | 36 | M33 | 45 |
| 600 | 609.6 | 845 | 46 | 125 | 660 | 720 | 5 | 770 | 20 | 39 | M36 | — |
| 700 | 711.2 | 960 | 46 | 125 | 760 | 820 | 5 | 875 | 24 | 42 | M39 | — |
| 800 | 812.8 | 1085 | 50 | 135 | 865 | 930 | 5 | 990 | 24 | 48 | M45 | — |
| 900 | 914.4 | 1185 | 54 | 145 | — | 1030 | 5 | 1090 | 28 | 48 | M45 | — |
| 1000 | 1016 | 1320 | 58 | 155 | 1070 | 1140 | 5 | 1210 | 28 | 56 | M52 | — |
- All dimensions are in millimetres.
- The PN 25 tables start at DN 175; for DN 10–150 IS 6392 refers to the PN 40 dimensions.
- IS 6392 drilling follows the ISO/DIN metric series, so IS 6392 flanges generally mate with EN 1092-1 / DIN flanges of the same PN — check the raised face and thickness for your flange type.
- Values are nominal dimensions from the standard; a dash (—) means the value is not listed. Verify against the current edition before design, purchase or fabrication.