IS 6392 — PN 100 (Table 37) — weld-neck flanges
IS 6392 PN 100 (Table 37) — weld-neck flanges — 17 sizes.
| Size | A — Pipe OD (mm) | D — Flange OD (mm) | C — Weld neck (mm) | H — WN length (mm) | N — Hub / neck dia (mm) | d1 — Raised face (mm) | f — RF height (mm) | K — Bolt circle (mm) | n — Bolts | L — Hole dia (mm) | Bolt — Size |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 | 17.2 | 100 | 20 | 45 | 32 | 40 | 2 | 70 | 4 | 14 | M12 |
| 15 | 21.3 | 105 | 20 | 45 | 34 | 45 | 2 | 75 | 4 | 14 | M12 |
| 20 | 26.9 | 130 | 22 | 58 | 42 | 58 | 2 | 90 | 4 | 18 | M16 |
| 25 | 33.7 | 140 | 24 | 58 | 52 | 68 | 2 | 100 | 4 | 18 | M16 |
| 32 | 42.4 | 155 | 24 | 60 | 62 | 78 | 2 | 110 | 4 | 22 | M20 |
| 40 | 48.3 | 170 | 26 | 62 | 70 | 88 | 3 | 125 | 4 | 22 | M20 |
| 50 | 60.3 | 195 | 28 | 68 | 90 | 102 | 3 | 145 | 4 | 26 | M24 |
| 65 | 76.1 | 220 | 30 | 76 | 108 | 122 | 3 | 170 | 8 | 26 | M24 |
| 80 | 88.9 | 230 | 32 | 78 | 120 | 138 | 3 | 180 | 8 | 26 | M24 |
| 100 | 114.3 | 265 | 36 | 90 | 150 | 162 | 3 | 210 | 8 | 30 | M27 |
| 125 | 139.7 | 315 | 40 | 105 | 180 | 188 | 3 | 250 | 8 | 33 | M30 |
| 150 | 168.3 | 355 | — | 115 | 210 | 218 | 3 | 290 | 12 | 33 | M30 |
| 175 | 193.7 | 385 | 48 | 127 | 245 | 260 | 3 | 320 | 12 | 33 | M30 |
| 200 | 219.1 | 430 | 52 | 130 | 278 | 285 | 3 | 360 | 12 | 36 | M33 |
| 250 | 273 | 505 | 60 | 157 | — | 345 | 3 | 430 | 12 | 39 | M36 |
| 300 | 323.9 | 585 | 68 | 170 | 400 | 410 | 4 | 500 | 16 | 42 | M39 |
| 350 | 355.6 | 655 | 74 | 189 | 460 | 465 | 4 | 560 | 16 | 48 | M45 |
- All dimensions are in millimetres.
- The PN 100 tables also apply to DN 10–40 at PN 64. IS 6392 has no blind-flange table at PN 100.
- IS 6392 drilling follows the ISO/DIN metric series, so IS 6392 flanges generally mate with EN 1092-1 / DIN flanges of the same PN — check the raised face and thickness for your flange type.
- Values are nominal dimensions from the standard; a dash (—) means the value is not listed. Verify against the current edition before design, purchase or fabrication.