IS 6392 — Plate & blind flange — NP0.6 (Table 5)

Name: IS 6392 Plate & blind flange — NP0.6 (Table 5)
License: https://teshigroup.com

IS 6392 Plate & blind flange — NP0.6 (Table 5) — 28 sizes.

Size (NB)	Outside dia (OD) (mm)	Bore / ID (plate) (mm)	Thickness — plate RF (mm)	Thickness — blind RF (mm)	Teshi QC flag
10	75	19.2	12	12	STD~ID
15	80	23.3	12	12	STD~ID
20	90	28.9	14	14	STD~ID
25	100	35.7	14	14	STD~ID
32	120	44.4	16	16	STD~ID
40	130	50.3	16	16	STD~ID
50	140	62.3	16	16	STD~ID
65	160	78.1	16	16	STD~ID
80	190	90.9	18	18	STD~ID
100	210	116.3	18	18	STD~ID
125	240	141.7	20	20	STD~ID
150	265	170.3	20	20	STD~ID
200	320	221.1	22	22	STD~ID
250	375	275	24	24	STD~ID
300	440	325.9	24	24	STD~ID
350	490	357.6	26	26	STD~ID
400	540	408.4	28	28	STD~ID
500	645	510	30	30	STD~ID
600	755	611.6	32	32	STD~ID
700	860	713.2	34	34	STD~ID
800	975	814.8	38	38	STD~ID
900	1075	916.4	42	42	STD~ID
1000	1175	1018	46	46	STD~ID
1200	1405	1222	56	56	STD~ID
1400	1630	1422	66	66	STD~ID
1600	1830	1622	74	74	STD~ID
1800	2045	1822	84	84	STD~ID
2000	2265	2022	92	92	STD~ID

Blind rows record ID as [0.0] in source; omitted.
PLATE FF thickness identical to PLATE thickness for every size; FF column omitted.
BLIND FF thickness identical to BLIND thickness for every size; FF column omitted.
Source has no values for: PCD, No. of holes, Hole dia, RF dia, RF height.
Source StdRegistry tab maps NP0.6 to IS 6392 Table 5.
Verified flag values are copied from the source: 'STD', 'STD~ID' or 'CHECK'. The source does not define them; 'STD~ID' presumably means standard dimensions with a derived/non-standard ID, and 'CHECK' rows were flagged for review.
Size column is the NB taken from the source Key (e.g. 'NB150'); 'Size label in source' is the Size cell as typed.