Teshi PipeData
Other items · ISMC Channel Sizes and Weights

ISMC Channel Sizes and Weights Designation ISMC 225 IS 808 — IS 808

ISMC Channel Sizes and Weights Designation ISMC 225 IS 808 to IS 808: h — depth, mm 225 mm, b — flange width, mm 80 mm, tw — web, mm 6.5 mm, tf — flange, mm 12.4 mm, mass — kg/m 26.1 kg/m.

Dimensions of ISMC Channel Sizes and Weights Designation ISMC 225 IS 808

SymbolDimensionValue
·h — Depth, mm225 mm (8.858 in)
·b — Flange width, mm80 mm (3.150 in)
·tw — Web, mm6.5 mm (0.256 in)
·tf — Flange, mm12.4 mm (0.488 in)
·Mass — kg/m26.1 kg/m (17.54 lb/ft)
·Area — cm²33.3 cm²

SKU TSH-OTHER-IS-808-IS-808-ISMC225 · Standard IS 808 · teshi-web

Purchase description

ISMC CHANNEL SIZES AND WEIGHTS, Designation ISMC 225, IS 808, AS PER SPECIFICATION, IS 808

Available materials: As per specification.

Notes

Other sizes — ISMC Channel Sizes and Weights, IS 808

Frequently asked questions

What are the main types of pipe flanges?

Weld neck (WN), slip-on (SO), blind (BL), socket weld (SW), threaded (THD), lap joint (LJ) and plate flanges. Special types include orifice, long weld neck, reducing flanges and spectacle blinds.

When should I use a weld neck flange instead of a slip-on?

Use weld neck flanges for high pressure, high or cycling temperature, and lines with vibration or fatigue loading. The tapered hub and full-penetration butt weld spread stress smoothly. Slip-on flanges are cheaper and easier to align, but their fatigue life is roughly one third of a WN.

What does Class 150, 300 or 600 mean on a flange?

The ASME class is a pressure-rating designation, not a pressure in psi. The allowable pressure depends on the material group and temperature. A Class 150 A105 flange is rated 19.6 bar at 38 °C but 13.8 bar at 200 °C.

Is a 150# flange rated for 150 psi?

No. A Class 150 carbon-steel flange is rated about 285 psi (19.6 bar) at ambient temperature, and about 170 psi (11.7 bar) at 260 °C. The "150" is a class number.

All piping FAQs →