Ductile iron pipes DN 100 OD and wall thickness — IS 8329
Ductile iron pipes DN 100 OD and wall thickness to IS 8329: external dia 118 mm, k7 wall 5 mm, k9 wall 6 mm.
Dimensions of Ductile iron pipes DN 100 OD and wall thickness
| Symbol | Dimension | Value |
|---|---|---|
| DE | External dia | 118 mm (4.646 in) |
| · | K7 wall | 5 mm (0.197 in) |
| · | K9 wall | 6 mm (0.236 in) |
SKU TSH-IRON-IS-8329-OD-AND-WALL-THICKNESS-100 · Standard IS 8329
Purchase description
DUCTILE IRON PIPES, DN 100, OD AND WALL THICKNESS, DUCTILE IRON (IS 1865 / SG IRON), IS 8329
Available materials: Ductile iron (IS 1865 / SG iron), Grey cast iron (IS 210 FG 200), Ductile iron, cement-mortar lined, Ductile iron, epoxy coated.
Other sizes — Ductile iron pipes, OD and wall thickness
DN 80DN 150DN 200DN 250DN 300DN 350DN 400DN 450DN 500DN 600DN 700DN 800DN 900DN 1000DN 1100DN 1200
Frequently asked questions
What is the difference between a long radius and short radius elbow?
A long radius (LR) elbow has a centre-line radius of 1.5 × NPS and is the default choice. A short radius (SR) elbow has a radius of 1.0 × NPS. SR elbows save space but add pressure drop and are not suitable for pigging.
What is the centre-to-end dimension of a 90° LR elbow?
For ASME B16.9 90° LR elbows the centre-to-end dimension A is 1.5 × NPS in inches. For example, a 6" elbow is 229 mm (9 in) and a 4" elbow is 152 mm (6 in).
What is the difference between a concentric and an eccentric reducer?
A concentric reducer keeps both ends on the same centre line. An eccentric reducer has one flat side. Eccentric reducers go on pump suctions with the flat side on top, so air pockets cannot form.
What is a 3D or 5D bend?
A bend whose centre-line radius is 3 or 5 times the nominal pipe size. They are usually made by induction bending and supplied with tangent lengths. 5D bends allow pigging in pipelines.