Table E Flange Dimensions 18 — BS 10
Table E Flange Dimensions 18 to BS 10: size — · mm 450, d — flange od · mm 641 mm, c — steel, heavy series · mm 29 mm, k — bolt circle · in 23 in, k — bolt circle · mm 584 mm.
Dimensions of Table E Flange Dimensions 18
| Symbol | Dimension | Value |
|---|---|---|
| · | Size — · mm | 450 |
| · | D — Flange OD · in | 25 1/4 in |
| · | D — Flange OD · mm | 641 mm (25.236 in) |
| · | C — Steel, heavy series · in | 1 1/8 in |
| · | C — Steel, heavy series · mm | 29 mm (1.142 in) |
| · | C — Steel, light series · in | 1 3/8 in |
| · | C — Cast iron · in | 1 3/8 in |
| · | K — Bolt circle · in | 23 in |
| · | K — Bolt circle · mm | 584 mm (22.992 in) |
| · | n — Bolts | 16 |
| · | L — Hole dia · in | 1 in |
| · | L — Hole dia · mm | 25 mm (0.984 in) |
| · | Bolt — Size · in | 7/8 in |
SKU TSH-FLANGE-BS-10-18 · Standard BS 10 · teshi-web
Purchase description
TABLE E FLANGE DIMENSIONS, 18, ASTM A105N, BS 10
Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11 Cl 2, ASTM A182 F22 Cl 3, ASTM A182 F51 (Duplex), ASTM A182 F53 (Super Duplex), ASTM A694 F52 / F60, IS 2062 E250 (plate).
Notes
- Inch and millimetre values are given as published; BS 10 is an inch standard.
- BS 10 is withdrawn and superseded by BS EN 1092-1, but Table D, E, F and H drilling is still widely used on existing plant, marine and UK-pattern equipment.
- Two steel thickness series are published for BS 10 Table E: a heavier series (forged / cast steel) and a lighter plate series. Confirm which applies to your flange type.
- Values are nominal, compiled from published copies of the standard; blank cells (—) are values not confirmed from the sources available. Verify against the current edition before design, purchase or fabrication.
Other sizes — Table E Flange Dimensions, Standard
1/23/411 1/41 1/222 1/233 1/24567891012131415161719202122232427293033353639424548
Frequently asked questions
What are the main types of pipe flanges?
Weld neck (WN), slip-on (SO), blind (BL), socket weld (SW), threaded (THD), lap joint (LJ) and plate flanges. Special types include orifice, long weld neck, reducing flanges and spectacle blinds.
When should I use a weld neck flange instead of a slip-on?
Use weld neck flanges for high pressure, high or cycling temperature, and lines with vibration or fatigue loading. The tapered hub and full-penetration butt weld spread stress smoothly. Slip-on flanges are cheaper and easier to align, but their fatigue life is roughly one third of a WN.
What does Class 150, 300 or 600 mean on a flange?
The ASME class is a pressure-rating designation, not a pressure in psi. The allowable pressure depends on the material group and temperature. A Class 150 A105 flange is rated 19.6 bar at 38 °C but 13.8 bar at 200 °C.
Is a 150# flange rated for 150 psi?
No. A Class 150 carbon-steel flange is rated about 285 psi (19.6 bar) at ambient temperature, and about 170 psi (11.7 bar) at 260 °C. The "150" is a class number.