Teshi PipeData
Flanges · Series B weld neck flange

Series B weld neck flange 60" Class 75 (partial) — ASME B16.47 Series B (API 605)

Series B weld neck flange 60" Class 75 (partial) to ASME B16.47 Series B (API 605): outside diameter 1676.4 mm, bolt circle 1622.6 mm, no. of holes 44, hole diameter 28.6 mm.

BWOtfSECTIONn × hFACE VIEWSCHEMATIC — thickness per EN 1092-1 type
Series B weld neck flange 60" Class 75 (partial) — dimension symbols match the table below. © Teshi Group · www.teshigroup.com

Dimensions of Series B weld neck flange 60" Class 75 (partial)

SymbolDimensionValue
·Outside diameter1676.4 mm (66.000 in)
·Bolt circle1622.6 mm (63.882 in)
·No. of holes44
·Hole diameter28.6 mm (1.126 in)
·Bolt size1 in

SKU TSH-FLANGE-ASME-B16-47-SERIES-B-API-605-CLASS-75-PARTIAL-60 · Standard ASME B16.47 Series B (API 605) · single source — verify

Purchase description

SERIES B WELD NECK FLANGE, 60", CLASS 75 (PARTIAL), ASTM A105N, ASME B16.47 SERIES B (API 605)

Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11 Cl 2, ASTM A182 F22 Cl 3, ASTM A182 F51 (Duplex), ASTM A182 F53 (Super Duplex), ASTM A694 F52 / F60, IS 2062 E250 (plate).

Same size, other ratings

Other sizes — Series B weld neck flange, Class 75 (partial)

Frequently asked questions

What are the main types of pipe flanges?

Weld neck (WN), slip-on (SO), blind (BL), socket weld (SW), threaded (THD), lap joint (LJ) and plate flanges. Special types include orifice, long weld neck, reducing flanges and spectacle blinds.

When should I use a weld neck flange instead of a slip-on?

Use weld neck flanges for high pressure, high or cycling temperature, and lines with vibration or fatigue loading. The tapered hub and full-penetration butt weld spread stress smoothly. Slip-on flanges are cheaper and easier to align, but their fatigue life is roughly one third of a WN.

What does Class 150, 300 or 600 mean on a flange?

The ASME class is a pressure-rating designation, not a pressure in psi. The allowable pressure depends on the material group and temperature. A Class 150 A105 flange is rated 19.6 bar at 38 °C but 13.8 bar at 200 °C.

Is a 150# flange rated for 150 psi?

No. A Class 150 carbon-steel flange is rated about 285 psi (19.6 bar) at ambient temperature, and about 170 psi (11.7 bar) at 260 °C. The "150" is a class number.

All piping FAQs →