Teshi PipeData
Flanges · Series B Class 300 (mm)

Series B Class 300 (mm) 42"" — ASME B16.47

Series B Class 300 (mm) 42"" to ASME B16.47: dn 1050, o — outside dia 1335 mm, tf — weld neck 117.5 mm, tf — blind 117.5 mm, x — hub dia 1118 mm.

BRWOtfSECTIONn × hFACE VIEW
Series B Class 300 (mm) 42"" — dimension symbols match the table below. © Teshi Group · www.teshigroup.com

Dimensions of Series B Class 300 (mm) 42""

SymbolDimensionValue
·DN1050
·O — Outside dia1335 mm (52.559 in)
·tf — Weld neck117.5 mm (4.626 in)
·tf — Blind117.5 mm (4.626 in)
·X — Hub dia1118 mm (44.016 in)
·A — Hub at weld1074.7 mm (42.311 in)
·Y — Length thru hub203 mm (7.992 in)
·R — Raised face dia1168 mm (45.984 in)
·W — Bolt circle1244.6 mm (49.000 in)
·Holes — No.36
·Hole dia — mm47.6 mm (1.874 in)
·Bolt — in1¾" in

SKU TSH-FLANGE-ASME-B16-47-42" · Standard ASME B16.47 · teshi-web

Purchase description

SERIES B CLASS 300 (MM), 42"", ASTM A105N, ASME B16.47

Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11 Cl 2, ASTM A182 F22 Cl 3, ASTM A182 F51 (Duplex), ASTM A182 F53 (Super Duplex), ASTM A694 F52 / F60, IS 2062 E250 (plate).

Notes

Other sizes — Series B Class 300 (mm), Standard

Frequently asked questions

What are the main types of pipe flanges?

Weld neck (WN), slip-on (SO), blind (BL), socket weld (SW), threaded (THD), lap joint (LJ) and plate flanges. Special types include orifice, long weld neck, reducing flanges and spectacle blinds.

When should I use a weld neck flange instead of a slip-on?

Use weld neck flanges for high pressure, high or cycling temperature, and lines with vibration or fatigue loading. The tapered hub and full-penetration butt weld spread stress smoothly. Slip-on flanges are cheaper and easier to align, but their fatigue life is roughly one third of a WN.

What does Class 150, 300 or 600 mean on a flange?

The ASME class is a pressure-rating designation, not a pressure in psi. The allowable pressure depends on the material group and temperature. A Class 150 A105 flange is rated 19.6 bar at 38 °C but 13.8 bar at 200 °C.

Is a 150# flange rated for 150 psi?

No. A Class 150 carbon-steel flange is rated about 285 psi (19.6 bar) at ambient temperature, and about 170 psi (11.7 bar) at 260 °C. The "150" is a class number.

All piping FAQs →