Series B Class 150 (mm) 40"" — ASME B16.47
Series B Class 150 (mm) 40"" to ASME B16.47: dn 1000, o — outside dia 1175 mm, tf — weld neck 54.1 mm, tf — blind 65.2 mm, x — hub dia 1049 mm.
Dimensions of Series B Class 150 (mm) 40""
| Symbol | Dimension | Value |
|---|---|---|
| · | DN | 1000 |
| · | O — Outside dia | 1175 mm (46.260 in) |
| · | tf — Weld neck | 54.1 mm (2.130 in) |
| · | tf — Blind | 65.2 mm (2.567 in) |
| · | X — Hub dia | 1049 mm (41.299 in) |
| · | A — Hub at weld | 1019 mm (40.118 in) |
| · | Y — Length thru hub | 127 mm (5.000 in) |
| · | R — Raised face dia | 1080 mm (42.520 in) |
| · | W — Bolt circle | 1120.8 mm (44.126 in) |
| · | Holes — No. | 44 |
| · | Hole dia — mm | 28.6 mm (1.126 in) |
| · | Bolt — in | 1" in |
SKU TSH-FLANGE-ASME-B16-47-40" · Standard ASME B16.47 · teshi-web
Purchase description
SERIES B CLASS 150 (MM), 40"", ASTM A105N, ASME B16.47
Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11 Cl 2, ASTM A182 F22 Cl 3, ASTM A182 F51 (Duplex), ASTM A182 F53 (Super Duplex), ASTM A694 F52 / F60, IS 2062 E250 (plate).
Notes
- Dimensions are in millimetres unless stated otherwise.
- Thickness and hub length exclude the raised face: 2 mm for Class 150 and 300.
- Bolt holes are tabulated in inches in the standard; millimetre values are direct conversions.
- Some dimensions do not increase uniformly with size (for example Class 300 thickness at NPS 54" and 60"). This follows the standard.
Other sizes — Series B Class 150 (mm), Standard
26""28""30""32""34""36""38""42""44""46""48""50""52""54""56""58""60""
Frequently asked questions
What are the main types of pipe flanges?
Weld neck (WN), slip-on (SO), blind (BL), socket weld (SW), threaded (THD), lap joint (LJ) and plate flanges. Special types include orifice, long weld neck, reducing flanges and spectacle blinds.
When should I use a weld neck flange instead of a slip-on?
Use weld neck flanges for high pressure, high or cycling temperature, and lines with vibration or fatigue loading. The tapered hub and full-penetration butt weld spread stress smoothly. Slip-on flanges are cheaper and easier to align, but their fatigue life is roughly one third of a WN.
What does Class 150, 300 or 600 mean on a flange?
The ASME class is a pressure-rating designation, not a pressure in psi. The allowable pressure depends on the material group and temperature. A Class 150 A105 flange is rated 19.6 bar at 38 °C but 13.8 bar at 200 °C.
Is a 150# flange rated for 150 psi?
No. A Class 150 carbon-steel flange is rated about 285 psi (19.6 bar) at ambient temperature, and about 170 psi (11.7 bar) at 260 °C. The "150" is a class number.