Teshi PipeData
Flanges · PN 2.5 (Table 2)

PN 2.5 (Table 2) 1400 weld-neck flanges — IS 6392

PN 2.5 (Table 2) 1400 weld-neck flanges to IS 6392: a — pipe od 1420 mm, d — flange od 1575 mm, c — weld neck 26 mm, h — wn length 70 mm, n — hub / neck dia 1445 mm.

BORWtfSECTIONn × hFACE VIEWSCHEMATIC — thickness per EN 1092-1 type
PN 2.5 (Table 2) 1400 weld-neck flanges — dimension symbols match the table below. © Teshi Group · www.teshigroup.com

Dimensions of PN 2.5 (Table 2) 1400 weld-neck flanges

SymbolDimensionValue
·A — Pipe OD1420 mm (55.906 in)
·D — Flange OD1575 mm (62.008 in)
·C — Weld neck26 mm (1.024 in)
·H — WN length70 mm (2.756 in)
·N — Hub / neck dia1445 mm (56.890 in)
·d1 — Raised face1480 mm (58.268 in)
·f — RF height5 mm (0.197 in)
·K — Bolt circle1520 mm (59.843 in)
·n — Bolts36
·L — Hole dia30 mm (1.181 in)
·Bolt — SizeM27

SKU TSH-FLANGE-IS-6392-WELD-NECK-FLANGES-1400 · Standard IS 6392 · teshi-web

Purchase description

PN 2.5 (TABLE 2), 1400, WELD-NECK FLANGES, ASTM A105N, IS 6392

Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11 Cl 2, ASTM A182 F22 Cl 3, ASTM A182 F51 (Duplex), ASTM A182 F53 (Super Duplex), ASTM A694 F52 / F60, IS 2062 E250 (plate).

Notes

Other sizes — PN 2.5 (Table 2), weld-neck flanges

Frequently asked questions

What are the main types of pipe flanges?

Weld neck (WN), slip-on (SO), blind (BL), socket weld (SW), threaded (THD), lap joint (LJ) and plate flanges. Special types include orifice, long weld neck, reducing flanges and spectacle blinds.

When should I use a weld neck flange instead of a slip-on?

Use weld neck flanges for high pressure, high or cycling temperature, and lines with vibration or fatigue loading. The tapered hub and full-penetration butt weld spread stress smoothly. Slip-on flanges are cheaper and easier to align, but their fatigue life is roughly one third of a WN.

What does Class 150, 300 or 600 mean on a flange?

The ASME class is a pressure-rating designation, not a pressure in psi. The allowable pressure depends on the material group and temperature. A Class 150 A105 flange is rated 19.6 bar at 38 °C but 13.8 bar at 200 °C.

Is a 150# flange rated for 150 psi?

No. A Class 150 carbon-steel flange is rated about 285 psi (19.6 bar) at ambient temperature, and about 170 psi (11.7 bar) at 260 °C. The "150" is a class number.

All piping FAQs →