Teshi PipeData
Flanges · Plate & blind flange

Plate & blind flange NB 100 Class 400 — ASME B16.5

Plate & blind flange NB 100 Class 400 to ASME B16.5: outside dia 255 mm, pcd 200 mm, no. of holes 8, hole dia 25.4 mm, rf dia 157.2 mm.

RWOtfSECTIONn × hFACE VIEW
Plate & blind flange NB 100 Class 400 — dimension symbols match the table below. © Teshi Group · www.teshigroup.com

Dimensions of Plate & blind flange NB 100 Class 400

SymbolDimensionValue
ODOutside dia255 mm (10.039 in)
·PCD200 mm (7.874 in)
·No. of holes8
·Hole dia25.4 mm (1.000 in)
·RF dia157.2 mm (6.189 in)
·RF height6.4 mm (0.252 in)
·Bore / ID (plate/slip-on)116.1 mm (4.571 in)
·Thickness — plate RF41.4 mm (1.630 in)
·Thickness — plate FF35 mm (1.378 in)
·Thickness — blind RF41.4 mm (1.630 in)
·Thickness — blind FF35 mm (1.378 in)
·Teshi QC flagSTD

SKU TSH-FLANGE-ASME-B16-5-CLASS-400-100 · Standard ASME B16.5 · Teshi master data

Purchase description

PLATE & BLIND FLANGE, NB 100, CLASS 400, ASTM A105N, ASME B16.5

Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11 Cl 2, ASTM A182 F22 Cl 3, ASTM A182 F51 (Duplex), ASTM A182 F53 (Super Duplex), ASTM A694 F52 / F60, IS 2062 E250 (plate).

Notes

Other sizes — Plate & blind flange, Class 400

Frequently asked questions

What are the main types of pipe flanges?

Weld neck (WN), slip-on (SO), blind (BL), socket weld (SW), threaded (THD), lap joint (LJ) and plate flanges. Special types include orifice, long weld neck, reducing flanges and spectacle blinds.

When should I use a weld neck flange instead of a slip-on?

Use weld neck flanges for high pressure, high or cycling temperature, and lines with vibration or fatigue loading. The tapered hub and full-penetration butt weld spread stress smoothly. Slip-on flanges are cheaper and easier to align, but their fatigue life is roughly one third of a WN.

What does Class 150, 300 or 600 mean on a flange?

The ASME class is a pressure-rating designation, not a pressure in psi. The allowable pressure depends on the material group and temperature. A Class 150 A105 flange is rated 19.6 bar at 38 °C but 13.8 bar at 200 °C.

Is a 150# flange rated for 150 psi?

No. A Class 150 carbon-steel flange is rated about 285 psi (19.6 bar) at ambient temperature, and about 170 psi (11.7 bar) at 260 °C. The "150" is a class number.

All piping FAQs →