Teshi PipeData
Flanges · Plate & blind flange

Plate & blind flange NB 1200 Class 300 — ASME B16.47 Series B

Plate & blind flange NB 1200 Class 300 to ASME B16.47 Series B: outside dia 1510 mm, pcd 1416 mm, no. of holes 40, hole dia 50.8 mm, rf dia 1327 mm.

RWOtfSECTIONn × hFACE VIEW
Plate & blind flange NB 1200 Class 300 — dimension symbols match the table below. © Teshi Group · www.teshigroup.com

Dimensions of Plate & blind flange NB 1200 Class 300

SymbolDimensionValue
ODOutside dia1510 mm (59.449 in)
·PCD1416 mm (55.748 in)
·No. of holes40
·Hole dia50.8 mm (2.000 in)
·RF dia1327 mm (52.244 in)
·RF height2 mm (0.079 in)
·Bore / ID (plate)1228.6 mm (48.370 in)
·Thickness — plate RF127 mm (5.000 in)
·Thickness — plate FF125 mm (4.921 in)
·Thickness — blind RF133.4 mm (5.252 in)
·Thickness — blind FF131.4 mm (5.173 in)
·Teshi QC flagSTD~ID: PLATE; CHECK: PLATE FF/BLIND FF; STD: BLIND

SKU TSH-FLANGE-ASME-B16-47-SERIES-B-CLASS-300-1200 · Standard ASME B16.47 Series B · Teshi master data

Purchase description

PLATE & BLIND FLANGE, NB 1200, CLASS 300, ASTM A105N, ASME B16.47 SERIES B

Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11 Cl 2, ASTM A182 F22 Cl 3, ASTM A182 F51 (Duplex), ASTM A182 F53 (Super Duplex), ASTM A694 F52 / F60, IS 2062 E250 (plate).

Same size, other ratings

Other sizes — Plate & blind flange, Class 300

Frequently asked questions

What are the main types of pipe flanges?

Weld neck (WN), slip-on (SO), blind (BL), socket weld (SW), threaded (THD), lap joint (LJ) and plate flanges. Special types include orifice, long weld neck, reducing flanges and spectacle blinds.

When should I use a weld neck flange instead of a slip-on?

Use weld neck flanges for high pressure, high or cycling temperature, and lines with vibration or fatigue loading. The tapered hub and full-penetration butt weld spread stress smoothly. Slip-on flanges are cheaper and easier to align, but their fatigue life is roughly one third of a WN.

What does Class 150, 300 or 600 mean on a flange?

The ASME class is a pressure-rating designation, not a pressure in psi. The allowable pressure depends on the material group and temperature. A Class 150 A105 flange is rated 19.6 bar at 38 °C but 13.8 bar at 200 °C.

Is a 150# flange rated for 150 psi?

No. A Class 150 carbon-steel flange is rated about 285 psi (19.6 bar) at ambient temperature, and about 170 psi (11.7 bar) at 260 °C. The "150" is a class number.

All piping FAQs →