Teshi PipeData
Flanges · Plate & blind flange

Plate & blind flange NB 1400 Class 150 — ASME B16.47 Series B

Plate & blind flange NB 1400 Class 150 to ASME B16.47 Series B: outside dia 1600 mm, pcd 1543 mm, no. of holes 60, hole dia 31.8 mm, rf dia 1492 mm.

RWOtfSECTIONn × hFACE VIEW
Plate & blind flange NB 1400 Class 150 — dimension symbols match the table below. © Teshi Group · www.teshigroup.com

Dimensions of Plate & blind flange NB 1400 Class 150

SymbolDimensionValue
ODOutside dia1600 mm (62.992 in)
·PCD1543 mm (60.748 in)
·No. of holes60
·Hole dia31.8 mm (1.252 in)
·RF dia1492 mm (58.740 in)
·RF height2 mm (0.079 in)
·Bore / ID (plate)1426.9 mm (56.177 in)
·Thickness — plate RF71.6 mm (2.819 in)
·Thickness — plate FF69.6 mm (2.740 in)
·Thickness — blind RF89 mm (3.504 in)
·Thickness — blind FF87 mm (3.425 in)
·Teshi QC flagSTD~ID: PLATE; CHECK: PLATE FF/BLIND FF; STD: BLIND

SKU TSH-FLANGE-ASME-B16-47-SERIES-B-CLASS-150-1400 · Standard ASME B16.47 Series B · Teshi master data

Purchase description

PLATE & BLIND FLANGE, NB 1400, CLASS 150, ASTM A105N, ASME B16.47 SERIES B

Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11 Cl 2, ASTM A182 F22 Cl 3, ASTM A182 F51 (Duplex), ASTM A182 F53 (Super Duplex), ASTM A694 F52 / F60, IS 2062 E250 (plate).

Same size, other ratings

Other sizes — Plate & blind flange, Class 150

Frequently asked questions

What are the main types of pipe flanges?

Weld neck (WN), slip-on (SO), blind (BL), socket weld (SW), threaded (THD), lap joint (LJ) and plate flanges. Special types include orifice, long weld neck, reducing flanges and spectacle blinds.

When should I use a weld neck flange instead of a slip-on?

Use weld neck flanges for high pressure, high or cycling temperature, and lines with vibration or fatigue loading. The tapered hub and full-penetration butt weld spread stress smoothly. Slip-on flanges are cheaper and easier to align, but their fatigue life is roughly one third of a WN.

What does Class 150, 300 or 600 mean on a flange?

The ASME class is a pressure-rating designation, not a pressure in psi. The allowable pressure depends on the material group and temperature. A Class 150 A105 flange is rated 19.6 bar at 38 °C but 13.8 bar at 200 °C.

Is a 150# flange rated for 150 psi?

No. A Class 150 carbon-steel flange is rated about 285 psi (19.6 bar) at ambient temperature, and about 170 psi (11.7 bar) at 260 °C. The "150" is a class number.

All piping FAQs →