Teshi PipeData
Flanges · Class 600 orifice flange (mm)

Class 600 orifice flange (mm) 4"" — ASME B16.36

Class 600 orifice flange (mm) 4"" to ASME B16.36: o — outside dia 275 mm, t — min thickness 38.1 mm, r — raised face dia 157.2 mm, x — hub dia 152 mm, y — length thru hub 102 mm.

BRWOtfSECTIONn × hFACE VIEW
Class 600 orifice flange (mm) 4"" — dimension symbols match the table below. © Teshi Group · www.teshigroup.com

Dimensions of Class 600 orifice flange (mm) 4""

SymbolDimensionValue
·O — Outside dia275 mm (10.827 in)
·T — Min thickness38.1 mm (1.500 in)
·R — Raised face dia157.2 mm (6.189 in)
·X — Hub dia152 mm (5.984 in)
·Y — Length thru hub102 mm (4.016 in)
·W — Bolt circle215.9 mm (8.500 in)
·Holes — No.8
·Hole dia — mm25.4 mm (1.000 in)
·Bolt — in⅞" in
·Stud — Length, mm150 mm (5.906 in)

SKU TSH-FLANGE-ASME-B16-36-4" · Standard ASME B16.36 · teshi-web

Purchase description

CLASS 600 ORIFICE FLANGE (MM), 4"", ASTM A105N, ASME B16.36

Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11 Cl 2, ASTM A182 F22 Cl 3, ASTM A182 F51 (Duplex), ASTM A182 F53 (Super Duplex), ASTM A694 F52 / F60, IS 2062 E250 (plate).

Notes

Other sizes — Class 600 orifice flange (mm), Standard

Frequently asked questions

What are the main types of pipe flanges?

Weld neck (WN), slip-on (SO), blind (BL), socket weld (SW), threaded (THD), lap joint (LJ) and plate flanges. Special types include orifice, long weld neck, reducing flanges and spectacle blinds.

When should I use a weld neck flange instead of a slip-on?

Use weld neck flanges for high pressure, high or cycling temperature, and lines with vibration or fatigue loading. The tapered hub and full-penetration butt weld spread stress smoothly. Slip-on flanges are cheaper and easier to align, but their fatigue life is roughly one third of a WN.

What does Class 150, 300 or 600 mean on a flange?

The ASME class is a pressure-rating designation, not a pressure in psi. The allowable pressure depends on the material group and temperature. A Class 150 A105 flange is rated 19.6 bar at 38 °C but 13.8 bar at 200 °C.

Is a 150# flange rated for 150 psi?

No. A Class 150 carbon-steel flange is rated about 285 psi (19.6 bar) at ambient temperature, and about 170 psi (11.7 bar) at 260 °C. The "150" is a class number.

All piping FAQs →