Class 600 flange (mm) 24"" — ASME B16.5
Class 600 flange (mm) 24"" to ASME B16.5: dn 600, o — outside dia 940 mm, tf — min thickness 101.6 mm, r — raised face dia 692.2 mm, x — hub dia 718 mm.
Dimensions of Class 600 flange (mm) 24""
| Symbol | Dimension | Value |
|---|---|---|
| · | DN | 600 |
| · | O — Outside dia | 940 mm (37.008 in) |
| · | tf — Min thickness | 101.6 mm (4.000 in) |
| · | R — Raised face dia | 692.2 mm (27.252 in) |
| · | X — Hub dia | 718 mm (28.268 in) |
| · | A — Hub at weld | 610 mm (24.016 in) |
| · | Y — Weld neck | 203 mm (7.992 in) |
| · | Y — Slip-on / Thr / SW | 140 mm (5.512 in) |
| · | Y — Lap joint | 184 mm (7.244 in) |
| · | W — Bolt circle | 838.2 mm (33.000 in) |
| · | Holes — No. | 24 |
| · | Hole dia — mm | 50.8 mm (2.000 in) |
| · | Bolt — in | 1⅞" in |
SKU TSH-FLANGE-ASME-B16-5-24" · Standard ASME B16.5 · teshi-web
Purchase description
CLASS 600 FLANGE (MM), 24"", ASTM A105N, ASME B16.5
Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11 Cl 2, ASTM A182 F22 Cl 3, ASTM A182 F51 (Duplex), ASTM A182 F53 (Super Duplex), ASTM A694 F52 / F60, IS 2062 E250 (plate).
Notes
- Dimensions are in millimetres unless stated otherwise.
- Flange thickness tf and length through hub Y do not include the 7 mm raised face.
- Blind flanges have the same outside diameter, thickness tf and drilling as the other flange types of the same size and class.
- The bore of a weld neck or socket weld flange is machined to match the inside diameter of the pipe schedule stated in the order.
- Bolt holes are tabulated in inches in ASME B16.5; the millimetre values shown are direct conversions (bolt diameter plus ⅛").
- Stud bolt lengths do not include the height of the points. Weights are approximate catalogue values and vary with bore and manufacturer.
Other sizes — Class 600 flange (mm), Standard
½""¾""1""1¼""1½""2""2½""3""3½""4""5""6""8""10""12""14""16""18""20""
Frequently asked questions
What are the main types of pipe flanges?
Weld neck (WN), slip-on (SO), blind (BL), socket weld (SW), threaded (THD), lap joint (LJ) and plate flanges. Special types include orifice, long weld neck, reducing flanges and spectacle blinds.
When should I use a weld neck flange instead of a slip-on?
Use weld neck flanges for high pressure, high or cycling temperature, and lines with vibration or fatigue loading. The tapered hub and full-penetration butt weld spread stress smoothly. Slip-on flanges are cheaper and easier to align, but their fatigue life is roughly one third of a WN.
What does Class 150, 300 or 600 mean on a flange?
The ASME class is a pressure-rating designation, not a pressure in psi. The allowable pressure depends on the material group and temperature. A Class 150 A105 flange is rated 19.6 bar at 38 °C but 13.8 bar at 200 °C.
Is a 150# flange rated for 150 psi?
No. A Class 150 carbon-steel flange is rated about 285 psi (19.6 bar) at ambient temperature, and about 170 psi (11.7 bar) at 260 °C. The "150" is a class number.