Socket Weld Flange RF 1 ½" Class 300 — ASME B16.5
Socket Weld Flange RF 1 ½" Class 300 to ASME B16.5: outside diameter 155 mm, flange thickness, min 19.1 mm, raised face diameter 73 mm, raised face height 1.6 mm, bolt circle (pcd) 114.3 mm; approx. weight 2.7 kg.
Dimensions of Socket Weld Flange RF 1 ½" Class 300
| Symbol | Dimension | Value |
|---|---|---|
| O | Outside diameter | 155 mm (6.102 in) |
| tf | Flange thickness, min | 19.1 mm (0.752 in) |
| R | Raised face diameter | 73 mm (2.874 in) |
| f | Raised face height | 1.6 mm (0.063 in) |
| W | Bolt circle (PCD) | 114.3 mm (4.500 in) |
| n | Number of bolt holes | 4 |
| h | Bolt hole diameter | 22.2 mm (0.874 in) |
| d | Stud bolt size | 3/4" |
| Y | Length through hub | 31 mm (1.220 in) |
| X | Hub diameter | 70 mm (2.756 in) |
| B | Socket bore | 48.9 mm (1.925 in) |
| D | Socket depth | 16 mm (0.630 in) |
| B2 | Bore (Sch 40) | 40.9 mm (1.610 in) |
| m | Approximate weight | 2.7 kg (5.95 lb) |
SKU TSH-FLANGE-SW-B165-300-1.12 · Standard ASME B16.5 · weight: Calculated from nominal dimensions, carbon steel (ρ 7850 kg/m³)
Purchase description
FLANGE, SOCKET WELD, RAISED FACE, 1 ½" (DN 40), CLASS 300, BORE SCH 40, ASTM A105N, ASME B16.5
Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11 Cl 2, ASTM A182 F22 Cl 3, ASTM A182 F51 (Duplex), ASTM A182 F53 (Super Duplex), ASTM A694 F52 / F60, IS 2062 E250 (plate).
Bolting and gasket
4 stud bolts 3/4" UNC × 100 mm (4") with 8 heavy hex nuts — ASTM A193 B7 studs + A194 2H heavy hex nuts. Gasket: Spiral wound 1 ½" Class 300, ASME B16.20, SS316 + graphite, CS outer ring.
Additional data
| Facing | Raised face 1.6 mm, 3.2–6.3 µm Ra serrated |
Same size, other ratings
Other sizes — Socket Weld, Class 300
Frequently asked questions
What are the main types of pipe flanges?
Weld neck (WN), slip-on (SO), blind (BL), socket weld (SW), threaded (THD), lap joint (LJ) and plate flanges. Special types include orifice, long weld neck, reducing flanges and spectacle blinds.
When should I use a weld neck flange instead of a slip-on?
Use weld neck flanges for high pressure, high or cycling temperature, and lines with vibration or fatigue loading. The tapered hub and full-penetration butt weld spread stress smoothly. Slip-on flanges are cheaper and easier to align, but their fatigue life is roughly one third of a WN.
What does Class 150, 300 or 600 mean on a flange?
The ASME class is a pressure-rating designation, not a pressure in psi. The allowable pressure depends on the material group and temperature. A Class 150 A105 flange is rated 19.6 bar at 38 °C but 13.8 bar at 200 °C.
Is a 150# flange rated for 150 psi?
No. A Class 150 carbon-steel flange is rated about 285 psi (19.6 bar) at ambient temperature, and about 170 psi (11.7 bar) at 260 °C. The "150" is a class number.