Lap Joint Flange ¾" Class 600 — ASME B16.5
Lap Joint Flange ¾" Class 600 to ASME B16.5: outside diameter 115 mm, flange thickness, min 15.9 mm, bolt circle (pcd) 82.6 mm, number of bolt holes 4, bolt hole diameter 19 mm; approx. weight 1.2 kg.
Dimensions of Lap Joint Flange ¾" Class 600
| Symbol | Dimension | Value |
|---|---|---|
| O | Outside diameter | 115 mm (4.528 in) |
| tf | Flange thickness, min | 15.9 mm (0.626 in) |
| W | Bolt circle (PCD) | 82.6 mm (3.252 in) |
| n | Number of bolt holes | 4 |
| h | Bolt hole diameter | 19 mm (0.748 in) |
| d | Stud bolt size | 5/8" |
| Y | Length through hub | 32 mm (1.260 in) |
| X | Hub diameter | 48 mm (1.890 in) |
| B | Bore | 27.7 mm (1.091 in) |
| m | Approximate weight | 1.2 kg (2.65 lb) |
SKU TSH-FLANGE-LJ-B165-600-34 · Standard ASME B16.5 · weight: Calculated from nominal dimensions, carbon steel (ρ 7850 kg/m³)
Purchase description
FLANGE, LAP JOINT, FLAT FACE, ¾" (DN 20), CLASS 600, ASTM A105N, ASME B16.5
Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11 Cl 2, ASTM A182 F22 Cl 3, ASTM A182 F51 (Duplex), ASTM A182 F53 (Super Duplex), ASTM A694 F52 / F60, IS 2062 E250 (plate).
Bolting and gasket
4 stud bolts 5/8" UNC × 80 mm (3.25") with 8 heavy hex nuts — ASTM A193 B7 studs + A194 2H heavy hex nuts. Gasket: Spiral wound ¾" Class 600, ASME B16.20, SS316 + graphite, CS outer ring.
Additional data
| Facing | Flat face (lap) |
Notes
- Lap joint flanges are used with a MSS SP-43 / ASME B16.9 stub end; the raised face is provided by the stub end lap.
Same size, other ratings
Other sizes — Lap Joint, Class 600
Frequently asked questions
What are the main types of pipe flanges?
Weld neck (WN), slip-on (SO), blind (BL), socket weld (SW), threaded (THD), lap joint (LJ) and plate flanges. Special types include orifice, long weld neck, reducing flanges and spectacle blinds.
When should I use a weld neck flange instead of a slip-on?
Use weld neck flanges for high pressure, high or cycling temperature, and lines with vibration or fatigue loading. The tapered hub and full-penetration butt weld spread stress smoothly. Slip-on flanges are cheaper and easier to align, but their fatigue life is roughly one third of a WN.
What does Class 150, 300 or 600 mean on a flange?
The ASME class is a pressure-rating designation, not a pressure in psi. The allowable pressure depends on the material group and temperature. A Class 150 A105 flange is rated 19.6 bar at 38 °C but 13.8 bar at 200 °C.
Is a 150# flange rated for 150 psi?
No. A Class 150 carbon-steel flange is rated about 285 psi (19.6 bar) at ambient temperature, and about 170 psi (11.7 bar) at 260 °C. The "150" is a class number.