Lap Joint Flange 24" Class 150 — ASME B16.5
Lap Joint Flange 24" Class 150 to ASME B16.5: outside diameter 815 mm, flange thickness, min 46.1 mm, bolt circle (pcd) 749.3 mm, number of bolt holes 20, bolt hole diameter 35 mm; approx. weight 87.7 kg.
Dimensions of Lap Joint Flange 24" Class 150
| Symbol | Dimension | Value |
|---|---|---|
| O | Outside diameter | 815 mm (32.087 in) |
| tf | Flange thickness, min | 46.1 mm (1.815 in) |
| W | Bolt circle (PCD) | 749.3 mm (29.500 in) |
| n | Number of bolt holes | 20 |
| h | Bolt hole diameter | 35 mm (1.378 in) |
| d | Stud bolt size | 1-1/4" |
| Y | Length through hub | 83 mm (3.268 in) |
| X | Hub diameter | 663 mm (26.102 in) |
| B | Bore | 616 mm (24.252 in) |
| m | Approximate weight | 87.7 kg (193.35 lb) |
SKU TSH-FLANGE-LJ-B165-150-24 · Standard ASME B16.5 · weight: Calculated from nominal dimensions, carbon steel (ρ 7850 kg/m³)
Purchase description
FLANGE, LAP JOINT, FLAT FACE, 24" (DN 600), CLASS 150, ASTM A105N, ASME B16.5
Available materials: ASTM A105N, ASTM A350 LF2 Cl 1, ASTM A182 F304/304L, ASTM A182 F316/316L, ASTM A182 F11 Cl 2, ASTM A182 F22 Cl 3, ASTM A182 F51 (Duplex), ASTM A182 F53 (Super Duplex), ASTM A694 F52 / F60, IS 2062 E250 (plate).
Bolting and gasket
20 stud bolts 1-1/4" UNC × 185 mm (7.5") with 40 heavy hex nuts — ASTM A193 B7 studs + A194 2H heavy hex nuts. Gasket: Spiral wound 24" Class 150, ASME B16.20, SS316 + graphite, CS outer ring.
Additional data
| Facing | Flat face (lap) |
Notes
- Lap joint flanges are used with a MSS SP-43 / ASME B16.9 stub end; the raised face is provided by the stub end lap.
Same size, other ratings
Other sizes — Lap Joint, Class 150
Frequently asked questions
What are the main types of pipe flanges?
Weld neck (WN), slip-on (SO), blind (BL), socket weld (SW), threaded (THD), lap joint (LJ) and plate flanges. Special types include orifice, long weld neck, reducing flanges and spectacle blinds.
When should I use a weld neck flange instead of a slip-on?
Use weld neck flanges for high pressure, high or cycling temperature, and lines with vibration or fatigue loading. The tapered hub and full-penetration butt weld spread stress smoothly. Slip-on flanges are cheaper and easier to align, but their fatigue life is roughly one third of a WN.
What does Class 150, 300 or 600 mean on a flange?
The ASME class is a pressure-rating designation, not a pressure in psi. The allowable pressure depends on the material group and temperature. A Class 150 A105 flange is rated 19.6 bar at 38 °C but 13.8 bar at 200 °C.
Is a 150# flange rated for 150 psi?
No. A Class 150 carbon-steel flange is rated about 285 psi (19.6 bar) at ambient temperature, and about 170 psi (11.7 bar) at 260 °C. The "150" is a class number.