Teshi PipeData
Butt-weld fittings · IS 1239-2 Table 28

IS 1239-2 Table 28 Nominal size 65 hexagon nipples, equal (mm) — IS 1239-2

IS 1239-2 Table 28 Nominal size 65 hexagon nipples, equal (mm) to IS 1239-2: l basic gauge length + clearance 32 mm, t hexagon thickness 16 mm, a min overall length 80 mm, c max bore 64 mm, b width across flats 79 mm.

Dimensions of IS 1239-2 Table 28 Nominal size 65 hexagon nipples, equal (mm)

SymbolDimensionValue
·L basic gauge length + clearance32 mm (1.260 in)
·T hexagon thickness16 mm (0.630 in)
·A min overall length80 mm (3.150 in)
·C max bore64 mm (2.520 in)
·B width across flats79 mm (3.110 in)

SKU TSH-BW-IS-1239-2-HEXAGON-NIPPLES-EQUAL-MM-65 · Standard IS 1239-2 · teshi-web

Purchase description

IS 1239-2 TABLE 28, Nominal size 65, HEXAGON NIPPLES, EQUAL (MM), ASTM A234 WPB, IS 1239-2

Available materials: ASTM A234 WPB, ASTM A420 WPL6, ASTM A403 WP304/304L, ASTM A403 WP316/316L, ASTM A234 WP11, ASTM A234 WP22, ASTM A234 WP91, ASTM A815 UNS S31803.

Notes

Other sizes — IS 1239-2 Table 28, hexagon nipples, equal (mm)

Frequently asked questions

What is the difference between a long radius and short radius elbow?

A long radius (LR) elbow has a centre-line radius of 1.5 × NPS and is the default choice. A short radius (SR) elbow has a radius of 1.0 × NPS. SR elbows save space but add pressure drop and are not suitable for pigging.

What is the centre-to-end dimension of a 90° LR elbow?

For ASME B16.9 90° LR elbows the centre-to-end dimension A is 1.5 × NPS in inches. For example, a 6" elbow is 229 mm (9 in) and a 4" elbow is 152 mm (6 in).

What is the difference between a concentric and an eccentric reducer?

A concentric reducer keeps both ends on the same centre line. An eccentric reducer has one flat side. Eccentric reducers go on pump suctions with the flat side on top, so air pockets cannot form.

What is a 3D or 5D bend?

A bend whose centre-line radius is 3 or 5 times the nominal pipe size. They are usually made by induction bending and supplied with tangent lengths. 5D bends allow pigging in pipelines.

All piping FAQs →