EN 10253 / DIN 2615 Tee Dimensions DN 150 — EN 10253-2
EN 10253 / DIN 2615 Tee Dimensions DN 150 to EN 10253-2: d — pipe od 168.3 mm, f — centre to end 143 mm.
Dimensions of EN 10253 / DIN 2615 Tee Dimensions DN 150
| Symbol | Dimension | Value |
|---|---|---|
| · | D — Pipe OD | 168.3 mm (6.626 in) |
| · | F — Centre to end | 143 mm (5.630 in) |
SKU TSH-BW-EN-10253-2-150 · Standard EN 10253-2 · teshi-web
Purchase description
EN 10253 / DIN 2615 TEE DIMENSIONS, DN 150, ASTM A234 WPB, EN 10253-2
Available materials: ASTM A234 WPB, ASTM A420 WPL6, ASTM A403 WP304/304L, ASTM A403 WP316/316L, ASTM A234 WP11, ASTM A234 WP22, ASTM A234 WP91, ASTM A815 UNS S31803.
Notes
- All dimensions are in millimetres.
- Reducing tees use the same centre-to-end F as the equal tee of the larger size in most patterns; confirm for your outlet.
- Values are nominal dimensions from the standard; a dash (—) means the value is not listed. Verify against the current edition before design, purchase or fabrication.
Other sizes — EN 10253 / DIN 2615 Tee Dimensions, Standard
DN 15DN 20DN 25DN 32DN 40DN 50DN 65DN 80DN 90DN 100DN 125DN 200DN 250DN 300DN 350DN 400DN 450DN 500DN 550DN 600DN 650DN 700DN 750DN 800DN 850DN 900DN 1000DN 1050DN 1100DN 1150DN 1200
Frequently asked questions
What is the difference between a long radius and short radius elbow?
A long radius (LR) elbow has a centre-line radius of 1.5 × NPS and is the default choice. A short radius (SR) elbow has a radius of 1.0 × NPS. SR elbows save space but add pressure drop and are not suitable for pigging.
What is the centre-to-end dimension of a 90° LR elbow?
For ASME B16.9 90° LR elbows the centre-to-end dimension A is 1.5 × NPS in inches. For example, a 6" elbow is 229 mm (9 in) and a 4" elbow is 152 mm (6 in).
What is the difference between a concentric and an eccentric reducer?
A concentric reducer keeps both ends on the same centre line. An eccentric reducer has one flat side. Eccentric reducers go on pump suctions with the flat side on top, so air pockets cannot form.
What is a 3D or 5D bend?
A bend whose centre-line radius is 3 or 5 times the nominal pipe size. They are usually made by induction bending and supplied with tangent lengths. 5D bends allow pigging in pipelines.