EN 10253-2 90° elbows type 5D (mm) DN 300 — EN 10253-2
EN 10253-2 90° elbows type 5D (mm) DN 300 to EN 10253-2: d — pipe od 323.9 mm, r — 90° centre to end 770 mm, c — 180° centre to centre 1540 mm, k — 180° back to face 932 mm.
Dimensions of EN 10253-2 90° elbows type 5D (mm) DN 300
| Symbol | Dimension | Value |
|---|---|---|
| · | D — Pipe OD | 323.9 mm (12.752 in) |
| · | R — 90° centre to end | 770 mm (30.315 in) |
| · | C — 180° centre to centre | 1540 mm (60.630 in) |
| · | K — 180° back to face | 932 mm (36.693 in) |
SKU TSH-BW-EN-10253-2-300 · Standard EN 10253-2 · teshi-web
Purchase description
EN 10253-2 90° ELBOWS TYPE 5D (MM), DN 300, ASTM A234 WPB, EN 10253-2
Available materials: ASTM A234 WPB, ASTM A420 WPL6, ASTM A403 WP304/304L, ASTM A403 WP316/316L, ASTM A234 WP11, ASTM A234 WP22, ASTM A234 WP91, ASTM A815 UNS S31803.
Notes
- All dimensions are in millimetres. Elbows are listed by DN and outside diameter D.
- Type 2D, 3D and 5D give bend radius R ≈ 1, 1.5 and 2.5 × D. 3D is the EN equivalent of the ASME long-radius elbow.
- 180° returns: C = centre to centre (2R); K = back to face.
- Values are nominal dimensions from the standard; a dash (—) means the value is not listed. Verify against the current edition before design, purchase or fabrication.
Other sizes — EN 10253-2 90° elbows type 5D (mm), Standard
DN 15DN 20DN 25DN –DN 32DN 40DN –DN –DN 50DN –DN 65DN 80DN –DN –DN 100DN –DN 125DN –DN 150DN 200DN –DN 250DN 350DN 400DN 450DN 500DN 550DN 600DN 650DN 700DN 750DN 800DN 850DN 900DN 1000DN 1050DN 1100DN 1150DN 1200
Frequently asked questions
What is the difference between a long radius and short radius elbow?
A long radius (LR) elbow has a centre-line radius of 1.5 × NPS and is the default choice. A short radius (SR) elbow has a radius of 1.0 × NPS. SR elbows save space but add pressure drop and are not suitable for pigging.
What is the centre-to-end dimension of a 90° LR elbow?
For ASME B16.9 90° LR elbows the centre-to-end dimension A is 1.5 × NPS in inches. For example, a 6" elbow is 229 mm (9 in) and a 4" elbow is 152 mm (6 in).
What is the difference between a concentric and an eccentric reducer?
A concentric reducer keeps both ends on the same centre line. An eccentric reducer has one flat side. Eccentric reducers go on pump suctions with the flat side on top, so air pockets cannot form.
What is a 3D or 5D bend?
A bend whose centre-line radius is 3 or 5 times the nominal pipe size. They are usually made by induction bending and supplied with tangent lengths. 5D bends allow pigging in pipelines.