Teshi PipeData
Butt-weld fittings · Butt Weld Elbow Dimensions

Butt Weld Elbow Dimensions 20"" — ASME B16.9

Butt Weld Elbow Dimensions 20"" to ASME B16.9: dn 500, od — at bevel 508 mm, a — 90° long radius 762 mm, b — 45° long radius 318 mm, a — 90° short radius 508 mm.

Dimensions of Butt Weld Elbow Dimensions 20""

SymbolDimensionValue
·DN500
·OD — at bevel508 mm (20.000 in)
·A — 90° long radius762 mm (30.000 in)
·B — 45° long radius318 mm (12.520 in)
·A — 90° short radius508 mm (20.000 in)
·O — 180° LR return1524 mm (60.000 in)
·K — 180° LR return1016 mm (40.000 in)
·A — 90° 3D1524 mm (60.000 in)
·B — 45° 3D632 mm (24.882 in)

SKU TSH-BW-ASME-B16-9-20" · Standard ASME B16.9 · teshi-web

Purchase description

BUTT WELD ELBOW DIMENSIONS, 20"", ASTM A234 WPB, ASME B16.9

Available materials: ASTM A234 WPB, ASTM A420 WPL6, ASTM A403 WP304/304L, ASTM A403 WP316/316L, ASTM A234 WP11, ASTM A234 WP22, ASTM A234 WP91, ASTM A815 UNS S31803.

Notes

Other sizes — Butt Weld Elbow Dimensions, Standard

Frequently asked questions

What is the difference between a long radius and short radius elbow?

A long radius (LR) elbow has a centre-line radius of 1.5 × NPS and is the default choice. A short radius (SR) elbow has a radius of 1.0 × NPS. SR elbows save space but add pressure drop and are not suitable for pigging.

What is the centre-to-end dimension of a 90° LR elbow?

For ASME B16.9 90° LR elbows the centre-to-end dimension A is 1.5 × NPS in inches. For example, a 6" elbow is 229 mm (9 in) and a 4" elbow is 152 mm (6 in).

What is the difference between a concentric and an eccentric reducer?

A concentric reducer keeps both ends on the same centre line. An eccentric reducer has one flat side. Eccentric reducers go on pump suctions with the flat side on top, so air pockets cannot form.

What is a 3D or 5D bend?

A bend whose centre-line radius is 3 or 5 times the nominal pipe size. They are usually made by induction bending and supplied with tangent lengths. 5D bends allow pigging in pipelines.

All piping FAQs →